@@maribelquinones640 What do you think, Project Blue Falcon has passed
@MrSabram07
4 жыл бұрын
@@LosWackos what do you mean project blue falcon has passed? I mean this guy died or his company went bankrupt or his channel closed?
@zachswindler7612
4 жыл бұрын
He was killed in a motorcycle crash if i remember right miss the crap out of him was a huge help when we were getting started
@Sam-gr8pl
4 жыл бұрын
@@zachswindler7612 yes he died in bike crash
@Refused27
7 жыл бұрын
Thank you so much for making this video. I was literally about to give up I figured I had a bad board and was about to do a return. I watched this video and my new F4 board is working like a charm....Thank you again JC for everything you have done for this hobby. I don't know where I would be without your help. I definitely would have given up on this board but its working now thanks to your amazing knowledge and wisdom. RIP brother my heart aches daily in this hobby knowing you are no longer with us. Again Thank you JC your help is extremely invaluable.. May you rest in eternal peace flying the never ending LiPo with no voltage sag and crystal clear HD video. You are missed daily and dearly :(
@nicholasalbanese2477
7 жыл бұрын
I rarely ever comment, but this video helped me so much I wanted to say thank you. Then I heard the sad news... You will truly be missed. Thank you for all the great videos which will continue to help me and many others in the hobby.
@AlaskatrazFPV
6 жыл бұрын
Thank you SO MUCH for this video. I have been into RC for over 20 years and I just started building quads. I got an Omnibus F3 but I ended up getting another FC because I could not get it to connect to my PC. I finished 2 builds and decided to go back and look at the Omnibus. I put it under my scope and found that one tiny resistor was not soldered down on one side. I soldered it down and then it got recognized as a STM Virtual Port. Then the fun began. I NEVER WOULD HAVE BEEN ABLE TO GET IT WORKING IN A MILLION YEARS without your video. The part where you have to go into the driver setup and go to Windows/USB device - I NEVER would have figured that out. Spent all day rebuilding my 1st quad using the Omnibus and just finished my maiden AND my first pack in full FPV. I'm totally stoked. Been flying helis for several years but FPV is so cool. Too bad it's going to be snowing soon here in Alaska, so I'll just have to practice with a simulator. Thanks for your fantastic videos!!
@mericm1981
7 жыл бұрын
Thank you so much. It seems like all these other "hot shot" guys don't have time for this. I just completed my first build with an omnibus f4 pro and my computer would not flash. I appreciate this very much.
@ProjectBlueFalcon
7 жыл бұрын
Thanks a lot. I try to cover everything they don't.
@Silverheli2000
6 жыл бұрын
I cannot explain how much this helped me correctly load the Cleanflight silicon labs drivers on my PC. Thank you for taking the time to create this video.
@MrTolli
7 жыл бұрын
RIP You helped me from beyond the grave. wish you where here so i could thank you :(
@std_dav9434
4 жыл бұрын
what happened to him
@jeremyholaday1969
6 жыл бұрын
Big thanks man. Just hooked up my F3 board. Never would have been able to do this without you. Thanks for advancing the hobby.
@federicosagun4615
5 жыл бұрын
You have not left us bro. Your teaching still lingers. Even I have been flying for a while now I still refer to your channel to seek help. The community missing you so much. Rip
@TRITONFPV
10 ай бұрын
JC still helping till this day. May you RIP Brother 👊🏻
@hobbyobsession4057
6 жыл бұрын
Your my hero, man! After hours of frustration and countless useless downloads onto my laptop, you got my wizard x220 connected to BetaFlight . Can’t thank you enough
@fairlyfunctional2236
6 жыл бұрын
thanks jc,you have saved my sanity.not being very computer literate,i was having problems with betaflight and installing the drivers.this is the video that i was finally able to follow well enough to do it successfully.great video,thanks again.
@penutbutter005
5 жыл бұрын
Watched this and his other video that he has linked in the description because I couldn't get my computer to even detect that I had plugged in a flight controller. Tried 2 different FC's on every available USB port, went through all the steps, still....nothing! The problem ended up being the cable that I was using to connect with. I tried 2 different cables with no luck, and then tried a third which worked! Not sure what the difference is between them. Once I was able to finally connect, I was then able to go through the steps that JC goes over in the videos. Definitely miss his videos; great instruction and attention to detail!
@PaulHodgetts
7 жыл бұрын
Both this and your "How to Flash Firmware to Flight Controller" tutorials are just invaluable. Super clear, easy to follow, and both helped me get over the connect and flash learning curve on several boards. Awesome, many, many thanks!
@danielmarvin5055
7 жыл бұрын
had problems upgrading bff3 fc with your help I put the board into boot mode and replaced the driver with winusb... I was then finally able to upgrade firmware!! Though you may no longer be with us, you continue to help through your videos. And now a moment of silence. We will all miss you.
@tsmspace
7 жыл бұрын
SWEET! I got connected using your video with a presumed knockoff brushed f3 evo having no papers, links, or actual names that match anything other than being close enough to the spracing f3evo. I just followed your steps and it worked perfectly. I am very excited to have had a success!! thanks!!!
@christophschreder2655
7 жыл бұрын
Thanks, Thanks and once more THANKS for this perfect video. That´s what i need. I am new to the FPV Racecopter hobby and struggling the last days with getting my FC connected and flashed with new betaflight. Now it´s working! Great Job!
@MrSabram07
4 жыл бұрын
Halfway through this video and my head is spinning. Drivers and com ports and holy cow
@Ozem_Israel
7 жыл бұрын
couldn't find other video to respond on, but thanks JC, you got my build moving again. beta flight f3 just would not connect to my computer, the impulse rc till fixed it right up. I know electricity but computers but soo much thanks.
@camerong2558
7 жыл бұрын
Spent hours in frustration until this video, thank you!
@08maxout
7 жыл бұрын
Project Blue Falcon, thanks a lot I was getting no where with my newly purchased FC and decided to check your video out and I am now connecting to betaflight. Your videos have got me going in the right direction many times before had to let you know, you're doing a great job!!
@chiefreak
6 жыл бұрын
Duuuude I've spent hours trying to do this on my own. Thank you so much!
@8alakai8
7 жыл бұрын
very good detail video helpt me good all other videos did not explain as you did good work thank you
@Clickandcombust
5 жыл бұрын
You are a god among men. THANK YOU. I was ripping out what little hair I have trying to find a solution. Yours was the only one. I purchased a Spektrum F400 that was suppose to run on an older verison of Raceflight. Yeah right. Plus the Spektrum manuals for this controller blow! I ma just getting deep into the hobby now and this would have seriously made me reconsider even looking at Spektrum if I didn't already have one of their radios. THANK YOU AGAIN.
@k4x4map46
5 жыл бұрын
MATEK F7 Flashed @7:00 thank ya thank ya! Bless your heavenly soul still assisting us! Inspiration: by PBF will be the logo on my quad!
@DB-bd6ws
7 жыл бұрын
OMG you're a lifesaver. This video sorted what i couldnt figure out for hours. Also, this works just the same in cleanflight.
@tommysmith2908
7 жыл бұрын
Great vid JC. I think you finally beat it into my head how to set up my drivers...
@ProjectBlueFalcon
7 жыл бұрын
Ha thanks. I wish things would stop changing so I won't have to make these driver videos anymore. But unfortunately I have to make one for Raceflight and that's going to be a nightmare
@SchmityFPV
4 жыл бұрын
"Betaflight" is so great....Never had to sit on the computer for 2 hours trying to connect a flight controller using numerous drivers and youtube videos on librepilot.....
@brianbuccellato1532
6 жыл бұрын
Thanks so much for this! After hours of frustration, I finally got it working by using CLEANFLIGHT rather than Betaflight! I don't know what the deal is.... but finally something connects
@EdwinRodriguezRicandragon
2 жыл бұрын
WIsh you were still around! how you still help me is incredible!
@DeeRodLive
7 жыл бұрын
dude thank you soo much for this video i asked for help on this issue like 2 days before you went mia was tired of using the desktop lol also you saved me money because i was gonna give up and buy a new laptop because everyone elses except for mine would work anyway thank you again lol
@ProjectBlueFalcon
7 жыл бұрын
Awesome, glad it worked for you.
@einsteind
7 жыл бұрын
i have been pulling my hair out over my F3 evo board not connecting after flashing it last night, brilliant advise thanks for sharing this process,, it worked for me first time ,,,,, thanks again
@BonemysterFPV
7 жыл бұрын
Rest in peace, your videos have helped me out yet again
@garyjohn1076
7 жыл бұрын
Dude in UK very thankful! Very simple easy to follow advice. You got me connected to b/flight! no one else could! The long nights of searching for the way to connect to b/f are over! Thankyou
@christopherowenfpv9316
7 жыл бұрын
Just to let you know JC died in a motorcycle accident last week
@alekmichaelcomeault953
7 жыл бұрын
You are the best!!!😱😱 thank you so much....it didnt stop saying "serial port fail" but i followed your steps and worked!!! i have a omnibus f3 fc
@jamessteel9192
7 жыл бұрын
what did you do, i need to know!!!
@rentaroo
6 жыл бұрын
A really Huge thanks to JC on helping me fix this issue on one of my quads! Rest in Peace JC
@prrcpor
6 жыл бұрын
rentaroo I can't believe the kid died. What a shame. Such a smart kid. Motorcycles are dangerous. My father died. I almost 12 screws and a plate I'm fine. All from going fast on bikes. I had no idea this guy was gone.
@kevinhill5476
7 жыл бұрын
Hi J.C. Got mine to flash fine in c/f & b/f but wont connect, just get open port then timed out,, another superb lesson im sure when i play it back slowly the fix is there, KEEP UM COMING !
@ProjectBlueFalcon
7 жыл бұрын
When you plug in your USB without being in the bootloader, what driver are you seeing?
@kevinhill5476
7 жыл бұрын
silicon labs cp210x usb to uart bridge (com5) been trying most the day, the f/c is a furibee f3, got it at half price (mistake I think) on the first hook up it connected first time no problem at all, then i put all 4 motors on the inductrix frame bound it to my x9d D8 mode all was fine solid blue hooked back up to c/f & im still trying to get back in, will wait for your reply before i put my size 10 foot on it !!! Also got 2 omnibus (great boards) 3 naze 1 cc3d all hook up to c/t & b/f fine , thanks for your time, over the pond (KEVIN),
@ProjectBlueFalcon
7 жыл бұрын
I just took a look at it and I'm pretty sure its a CP210x board, so you're driver is right, you've got a com channel. I'm honestly not sure why its not working. The CP210x boards usually dont have any problems. Most of the problems come from the VCP boards. You've got me on this one. Guess its time to give it the size 10 haha. But seriously sorry about not having an answer.
@kevinhill5476
7 жыл бұрын
Thank you for trying,
@kevinlloyd3403
7 жыл бұрын
You are a legend i have been sitting here for hours trying to figure it out many thanks
@mrWonderphilly
7 жыл бұрын
Good enough to get me where I needed to be with my FC. Thanks man! Nice work... saved me a gazillion hours and a bunch of new swear words.
@m4st4Xk1ll4h
6 жыл бұрын
just want to say a big thank you. rest in peace jc
@forrestc21
7 жыл бұрын
I would've been screwed without this video!!! Thanks!
@drewwilkes2924
7 жыл бұрын
Thank you, sir! My KISS FC now shows up in the KISS GUI on Windows 10. Well done!
@timl5610
7 жыл бұрын
I can't thank you enough for making this video.. Honestly i was about ready to blend my flight controller!
@rs18000
6 жыл бұрын
again jc has helped me fix my issue. RIP
@youtubesuxgotorumble
7 жыл бұрын
omg thank you.i did everything.my x220 was lighting up with the blue light.but wasn't showing a com number.i switched to a different usb cable and it works.the whole time it was the freaking cable
@michaelturner5502
6 жыл бұрын
Your still helping me with my crazy problems.
@stephenmorrow3121
7 жыл бұрын
thank you! 5 hours of frustration 5 minutes watching your vid fixed job done.
@jaybreezin2391
6 жыл бұрын
When you said now when it gets confusing On the F3evo I about crapped. but It all worked. mine was in the same spot. That was a great video. I just checked it's fricken fixed. One lil win and don't hate this hobby near as much. I've never had a hobby that treated me so poorly. thank you so much. I've ben working on it since the 28th It just took a 100+ wrong videos to get it right. now if only it was raining lol. Your a strait BOSS thanks again. spoke to soon. wont go into bheil suit or arm. back to windows for dummies. I'm so over it. I am closer maybe
@johanneslugt2951
4 жыл бұрын
After weeks u had the answers i was looking for. Thank you so much!!!!
@AngeloIelardi
6 жыл бұрын
Miss you bro, also here in Italy. Thanks for all
@robhinze8626
7 жыл бұрын
thanks for this!! this helped me with my eachine e010s that came with zero instructions and wouldn't connect to cleanflight!
@rcpete7055
6 жыл бұрын
What about the usb drivers for blheli suite for Windows 10 tablet..?? Please help me find the drivers so I can connect to blheli suite
@jeff4992
7 жыл бұрын
Finally it worked! Maybe add an index so you can jump to the F4 or F3 part... :)
@permagroove
7 жыл бұрын
Rest In Peace man, you're still helping me!
@stofffpv3128
7 жыл бұрын
thanks very much had to go though most of this video to get to com8 on my comp..would have been lost without this video
@stofffpv3128
7 жыл бұрын
RIP guy
@kylemaxwell9850
7 жыл бұрын
I don't have an option for "Silicon Lab" when installing the driver to my hardware (5:38 on the video). How do I make this option appear????
@tubbyboy210
6 жыл бұрын
Kyle Maxwell have you ever figured it out?
@gologlaser5946
4 жыл бұрын
@@tubbyboy210 so i didnt
@Bstrong5001
7 жыл бұрын
Do you have any idea why a Ominbus F3 would just stop working, I flew with it yesterday .. I esoldered an LED strip that wasn't working and now it's totally unresponsive to power from the quads PDB, and it won't pick up with USB on the computer .. is it just screwed or is there something I can do?
@zach110
7 жыл бұрын
So, I updated the driver from CP2102 to CP210x like you said, and it moved from universal serial bus devices to COM & LPT just like you said to do and it gave me COM 7. It still wont let me connect so I try flashing the firmware and I get a red bar that says ''No response from the bootloader, programming failed.' What should I do? I cant find the boot pins/ pads/ buttons anywhere on my FC...
@MrMotor36
7 жыл бұрын
РЕСПЕЕЕКТ !!! Только ты спас меня от дальнейших мучений ))))) Respect !!! Only you saved me from further torment )))))
@luckylarz4269
7 жыл бұрын
just want to thank you so very much for the video you saved me so much time and frustration after hours of beating my head off my desk.. lol. thanks 1million times!!!
@somerandom3247
6 жыл бұрын
none of this is working for my BeeBrain v2. have the drivers downloaded, can't find it in the device manager, doesn't show up in zadig, and ImpulseRcDriver fixer doesn't get past "searching for devices". any idea where I am going wrong?
@ReaperRed55
6 жыл бұрын
For those who had trouble finding silicon labs file (i myself did) when it comes to updating just hit the "browse" tab and look into your downloads dile and find the driver that ypu just installed. Goodluck!
@daveishywood782
7 жыл бұрын
Thank you this was better than Joshua Bardwells video . Great job👍👌
@snaprollinpitts
7 жыл бұрын
hi, I have a DYS F4 board, but I can't get it to go in to DFU mode. do I need the zadig drivers even if I don't have that chipset. I have the STM32F4, any help would be greatly appreciated. mike
@zekeisme1
6 жыл бұрын
u did it sir u are the only one that has been able to help thanks for the video
@jsl151850b
6 жыл бұрын
*EVERYONE* is watching your video in the future, Mr. Past Guy!!
@itank8891
6 жыл бұрын
amen man i miss you... if you are watching this from above you just saved me! much love r.i.p
@Ergot67
7 жыл бұрын
Blue Falcon does it again ! Thank you !
@userunknown2771
3 жыл бұрын
Hi, I have my mamba f411 AIO working beautifully in normal mode, letting me configure my Betaflight settings, but in forced Bootloader it shows unknown device error 43. Do you know what that could be? Already tried different pc/cables, updated everything and also ImpulseRC shows "unexpected number of devices detected"
@JimmyDean1992
7 жыл бұрын
So i got everything down pat in the video and i still have no luck connecting the board. any more ideas? i have it on com port 3. I hear the board sync up with the computer when I plug it in. Just times out when trying to connect still. I am positive I have the right driver too. It is the silicone labs.
@salphite3722
4 жыл бұрын
Wachted 100000 vids, yours worked! THANKS!
@fasterdanu1
7 жыл бұрын
Im not sure what to do here, I got a Lizard 95 and i cant get it to connect to betaflight on a win 7 pc i have followed the detailed tutorial above but with no success. I have noticed under Device Manager i do not have the 'Ports (Com & LPT) visible as i know a port number needs to be defined for the usb STM32 Virtual Com Port. If i go to view in device manager and select 'Show hidden devices' I still am unable to see the Ports (Com & LPT) I checked BIOS and didnt see an option for COM Ports and have run all windows updates so im at a loss now, not sure what to do, any input would help Thank you
@hellfire08
7 жыл бұрын
in zadig, my colibri race flight controller comes up as unknown device. and when I go to replace (it says install on mine) the winusb like you said, it says driver installation failed (resource already exists)... helppp :(
@geminisduerme5266
4 жыл бұрын
I have a Omnibus f4 v5. I get a solid green light when I plug in usb and there is no sound of connection. For me I flashed the wrong firmware. I flashed Omnibus instead of Omnibus SD. What should I do is this something I can fix??? … Zadig doesnt even see the stem3 driver. and beta flight doesnt even detect any com ports. I have tryed just about everything. its like the usb connection is not detectable. did me flashing the wrong firmware screw up my omnibus f4 v5 ?? do I need to buy another?
@warmpankake962
7 жыл бұрын
I did everything right my my wizard x220 still won't show up with the bootloader thing under universal serial bus devices, instead it shows up as CP2102 USB to UART Bridge Controller still. What do I do?
@olegravylegfpv
7 жыл бұрын
i just updated windows 10 and now nothing is working! i cant flash cp210x or vcp boards, and impulserc tool is just searching for flight controller and all my drivers are current... any help so i can get back in the air? thank you in advance
@scdeluge
6 жыл бұрын
I have the sp f3 evo and I followed the steps but when I try to flash com9 disappears and it says port failed. When I connect it says "betaflight/cleanflight is not supported" any idea of what I can do?
@GGozzMontanelas
5 жыл бұрын
Men i love you. I just saved an fc from rubish because of you. Damn laptop.
@EvoEightRich03
6 жыл бұрын
I'm with you in till you select all hidden devices and go to silicon labs I don't get that option, so were do I go from there? this is really becoming a big pain in the butt. Every time I need to have something done, I have to go to the local hobby shop to have him do it for me. Anything you can do will be greatly appreciated.
@TheChrismullins
6 жыл бұрын
Hi I have installed the driver downloads but they don't show up under the ports in device manager like they do on your video plz can you help I'm also on Windows 10
@kevinbuecher
4 жыл бұрын
What was ur solution??
@VelanorCraftMC
7 жыл бұрын
i can't get my STM32 Virtual Com Port from USB devices to Ports, i'm on windows 7 and the stuff you see in this video with all the manufacturers doesn't show up for me
@KlazerFPV
5 жыл бұрын
This video saves my shit every time. Love the detailed explanation around 11:00 RIP man
@gospunion1
7 жыл бұрын
your pc beeps when u plug them in. . mine doesnt , nor does it show in device manager. both stoped showing after first connect saying firmware update needed. sp racing f3 evo.
@BloodyJMF
7 жыл бұрын
I don't get it i installed all drivers and i still can not get a single of my boards to show up on a com port. Not my xracer not my omnibus not even my naze. What am i doing wrong? Also the impulserc Driverfixer just keeps looking for boards. i wanna update my quads and go fly :(
@gaiaoffire
3 жыл бұрын
this is the only video that helped me.TY
@michahermann7869
7 жыл бұрын
So I have a flight controller with a CP2102 chip on it. I Installed the first two drivers on the list (zadiac port doesn't show up), too but when I click on connect it says "serial port successfully opened" but nothing else happens. After 10 seconds it says "no configuration received within 10 seconds, communication faild" and "Serial Port successfully closed". Bridging the Boot contacts doesn't help, too and flashing doesn't work. Can someone help me please? What have I done wrong?
@reidbtable
7 жыл бұрын
I have a DYS F4...I cant connect to betaflight or my computer via the usb port. The FC was working flawlessly until i attempted to flash BF 3.17. Flashing hung for 7 mins before I unplugged the usb cable. I tried to connect, but now i am getting no lights on the board and it is no being recognized by my computer. When i connect the battery, i just get a solid red led. i am highly dissapointed this FC is great.
@wdavie27
7 жыл бұрын
project blue falcon hiya im having problems trying to flash and connect my f3 delux in cleanflight iv followed your video,s downloaded the drivers but still not able to open serial port can you give my any help or advice on this please
@RICOTVyoutube
7 жыл бұрын
Hi JC, I have fallow all the instructions on your videos as I am new to drones I managed to update my taranis plus and changed the firmware on the FrSky X4R receiver so fare so that's all connecting green light all working ok and well, but now I have no response from controllers they engines are not moving, the green light comes up after turning the control on and all seems fine but no movement on the crusader gt2. So I connected the usb cable to the SP3 crusader gt2 board and tried to connect using BETAFLIGHT then CLEANFLIGHT but no joy nothing is happening cant connect, cant flush cant do a thing to it! I have fallow this video changed the ports all ok at the end comes up COM5 but still no connection? any chance you can help as I am struggling a lot to make this work just expended the all day but no luck
@nickpither9635
4 жыл бұрын
Thank you soooo much for this video I was going mad trying to work this out your a star! :)
@camdensrandomstuff8815
7 жыл бұрын
For the F3 VCP boards it doesn't show that I have USB Serial device anywhere install. Does this mean I have to try another computer for it to work?
@madforit9661
7 жыл бұрын
The problem i have I was flashing and when it came to the end of flashing It never said complete,it froze I tried to re flash but it wouldn't .It is now perminantly in boot mode The computer does not reconise when pluged in It's not found in Zadig I have installelled stm32 and the cp2 drivers How do i get the computer to reconise it Thanks
@DangerDavefpv
7 жыл бұрын
i cant get anything to show besides manual selection on betaflight i just tried flashing and it said successful but still cant get to work, it dont even beep when pluggin in my flight controller this is on a hyperlite f4
@tylerfbass1220
6 жыл бұрын
Hey Project Blue Falcon i have a problem going on My Furibee F36s kit came in I built the drone and watched your video on how to flash the fimware tried it like 30 times but it still wont work any tips?
@Padoodleful
7 жыл бұрын
Thank you!! Turns out to flash my Naze32 AIO, you don't need to use the boot pins or click connect lol
@PlainVlogs
6 жыл бұрын
Mine says “failed to open serial port”
@rizalff6522
5 жыл бұрын
Same think
@connorodom6449
5 жыл бұрын
Ever find a fix?
@rizalff6522
5 жыл бұрын
@@connorodom6449 no
@highlight3846
4 жыл бұрын
Same with my tinyhawk2 Still “failed to open serial port” grumble 😖 grumble
@PlainVlogs
4 жыл бұрын
yeah u guys are probably using the wrong wire.
@quinn6786
6 жыл бұрын
dudeeeeee thank you for taking the time to do this subscribed
@jfivecoat
7 жыл бұрын
Thanks! finally was able to update my qx90.
@jdoe9780
7 жыл бұрын
I "showed all devices" on Zadig but the only selections i can choose from is my mouse and web cam. On Betaflight I dont see any port choices only "Manual Selection. I am stuck like a duck, pls Help.
@ProjectBlueFalcon
7 жыл бұрын
What flight controller are you using? My first thoughts are, try a different usb cable. Because I've had some bad cables before. Then try a different computer.
Пікірлер: 295