today is national pound it day!! good job- your channel is getting more and more unique
@ontherebel11
2 жыл бұрын
Thank you T! Always!
@georgesienny7003
2 жыл бұрын
Good video I’m in the process of changing my front and back I have 9000 miles on the tires your videos are very informative thank you keep up the good work!
@ontherebel11
2 жыл бұрын
Hi George! It's good to hear from you brother! What did you decide to change them to?
@georgesienny7003
2 жыл бұрын
@@ontherebel11 I just ordered a Shinto 777 heavy duty rear 180/65/16 and a Shinto 777 heavy duty front 130/70/18
@georgesienny7003
2 жыл бұрын
Shinko
@ontherebel11
2 жыл бұрын
@@georgesienny7003 I've heard good things about them! Please let us know how they feel, it would be cool to compare the Cruistecs to the 777
@AmerSheikh
2 жыл бұрын
Beautiful installation and very well done! Keeps me always hooked till the end...Ride Safe!
@ontherebel11
2 жыл бұрын
Thank you so much Amer! 🙏
@jdbacon1366
Жыл бұрын
Hey Gus! If it weren't for your videos I don't know if I would have the confidence to change my own tires! What is that front wheel stand?
@ontherebel11
Жыл бұрын
Hi JD! Always good to hear from you brother! 🤙 I'm very happy to hear that you are finding the videos helpful man! The front stand is made by vortex! Awesome solid and affordable stand! I love mine! Vortex Fork Lift Front Stand www.amazon.com/dp/B0197M67MG?ref=ppx_pop_mob_ap_share
@billybobhammer
2 жыл бұрын
Great video. This is fantastic. Thank you.
@ontherebel11
2 жыл бұрын
Thank you Billybob! Much appreciated brother 🙏
@billybobhammer
2 жыл бұрын
@@ontherebel11 I even bought the exact lift and hammer you're using.
@ontherebel11
2 жыл бұрын
@@billybobhammer that's so cool! They are awesome tools! 👌
@ourcarrot
2 жыл бұрын
How are you? Are you doing OK? There will be huge snow storm expected here in KS tomorrow. Watching your clips is one of my joy, and I am waiting for yours always. The amazon link of front tire stand does not work. I am thinking to purchase a pitbull stand for a rear one. Hope you are well, and to see you next clips soon.
@ontherebel11
2 жыл бұрын
I'm doing great Michael, thank for asking brother, hope you are doing great my man! I sincerely appreciate your encouragement and kind words, thank you Michael!! Our winter storm just passed through a couple of days ago, i hope you are not sending us another one LOL, a few short weeks before spring is here!! can't wait! You are right about the front stand..... i just checked and it is out of stock both on amazon and on vortex site.... sorry about that brother here is the link from their website. it's an awesome stand by the way, i'm extremely happy with it, top quality for sure! www.vortexracing.com/product/front-stand-fork-lift/
@my2wheels
2 жыл бұрын
Great job!
@ontherebel11
2 жыл бұрын
Thank you!
@Eric-eh7vg
2 жыл бұрын
Wow do you have a link for the air jack you use to support the tire? I kill myself with my tires every time.
@ontherebel11
2 жыл бұрын
Hi Eric! I can't recommend the air shim enough, especially for the rear wheel as it is very awkward with the fender being so close to the wheel, it's hard to do alone. Here's the one I'm using www.homedepot.com/p/Calculated-Industries-Contractor-Grade-AirShim-Inflatable-Pry-Bar-and-Leveling-Tool-that-Holds-Up-To-300-lbs-1190/206697086?source=shoppingads&locale=en-US&&mtc=Shopping-BF-F_D25T-G-D25T-025_001_HAND_TOOLS-Multi-NA-NA-SMART-NA-NA-Hand_Tools&cm_mmc=Shopping-BF-F_D25T-G-D25T-025_001_HAND_TOOLS-Multi-NA-NA-SMART-NA-NA-Hand_Tools-71700000086053656-58700007291967538-92700065470082129&gclid=CjwKCAjw8sCRBhA6EiwA6_IF4QCRf0lOiU4XPvYM9F0t5tx1y_uq7HfCqnsPX09R4akQaafOeIAW_RoCp-kQAvD_BwE&gclsrc=aw.ds
@Eric-eh7vg
2 жыл бұрын
You rock.
@Eric-eh7vg
2 жыл бұрын
How did you lift the back without using the front brake?
@ontherebel11
2 жыл бұрын
Hi Eric! You don't need to apply the brakes while lifting the rear wheel, the wheels of the stand roll underneath the bike. I place a 2x4 block under the side stand to get the bike as upright as possible, then support the bike with my left hand on the saddlebags carrier or fender, and push down on the rear stand with my right hand. Hope that helps my man 👍
@B737Matt
11 ай бұрын
The Amazon link for that front stand doesn’t work anymore. Do you by chance have another link you could provide?
@ontherebel11
11 ай бұрын
Hi Matt, here you go brother! You might be able to find it cheaper at other places www.sportbiketrackgear.com/vortex-forklift-front-motorcycle-stand/?gclid=EAIaIQobChMIkPeFmePcgQMVjktHAR30SAaAEAAYAyAAEgKFMfD_BwE
@B737Matt
11 ай бұрын
Thanks brother, I appreciate it!
@ontherebel11
11 ай бұрын
@@B737Matt anytime! 🤙
@negotiatingreality8142
2 жыл бұрын
very well done sir!
@ontherebel11
2 жыл бұрын
Thank you sir! 🙏
@ourcarrot
2 жыл бұрын
I found your reply to Hansen after posting my previous comment. Regarding Harbor Freight, it is only almost 1/4 price compared to Pitbull. Did it fit without any modification? Thanks,
@ontherebel11
2 жыл бұрын
Hi Michael!! If you don't have the stock exhaust, the harbor freight swingarm stand will work without any modifications. If you still have the stock exhaust, you will need to add a couple of pieces of 2x4 like you see in the linked chain adjustment video kzitem.info/news/bejne/kad8lpmCfptegGk
@ourcarrot
2 жыл бұрын
Thanks for sharing your knowledge always. Here is my simple question. Why did you buy nicer one for front only? Isn't rear one more important due to weight? I am very happy because I have a connection with a very experienced rider.
@ontherebel11
2 жыл бұрын
@@ourcarrot thank you Michael! I looked everywhere for the harbor freight front stand but I couldn't find it locally, so the next best option for me was the vortex stand. I got a good deal on it on Amazon, otherwise I would definitely have gotten the front harbor freight front stand!
@theacn5308
Жыл бұрын
What kind of lube?
@ontherebel11
Жыл бұрын
Hi TheACN, I'm using white lithium grease but any grease will do.
@weiwei1808
2 жыл бұрын
good
@ontherebel11
2 жыл бұрын
Thank you Wei!
@sergiovelasco5020
2 жыл бұрын
Great job! Could you provide the link for the stand? Thanks.
@ontherebel11
2 жыл бұрын
Thank you Sergio!!! Here is the stand i got from Amazon, highly recommended!! www.amazon.com/gp/product/B0197M67MG/ref=ppx_yo_dt_b_asin_title_o02_s00?ie=UTF8&psc=1
@chrishansen1323
2 жыл бұрын
? Where did you get your wheel lifts
@ontherebel11
2 жыл бұрын
Hi Chris! The rear stand is a harbor freight swingarm stand, the front is a vortex stand. www.harborfreight.com/motorcycle-swingarm-rear-stand-65620.html www.amazon.com/dp/B0197M67MG?psc=1&ref=ppx_yo2_dt_b_product_details
Пікірлер: 42