👏 Thanks for the detailed walkthrough, buddy! I finally pulled my Rebel's wheels today and gave it some new shoes... Metzeler Cruisetec's! I couldn't find my shop manual, so I referenced your videos on the front and rear wheels to find the torque specs for the axles and caliper bolts. However, I didn't have your fancy Air Shim, so I spent over 30 minutes screaming, cursing, and skinning my knuckles trying to get that rear wheel wedged back in there. What a ginormous pain in the a$$! The rear wheel and tire are heavy, and the swingarm has ZERO slack for those axle shims. I used my feet as wedges to hold up the wheel, my hands to steer it diagonally while twisting upward, and my chest to push the axle through the labyrinth of well-lubed orifices in that rear carrier assembly. That's not fun. Not at all. I looked like a third-rate reject from a midget gypsy circus trying to pretzel my feet behind my head! I definitely won't try that again until I get one of those Air Shims! 🤣👍--QM
@ontherebel11
Жыл бұрын
OMG Quasi! Thank you so much brother, that is so generous of you man!!! I can't stop laughing hahahahahhahahahhahaha, the truth of the matter is that you described THIS gypsy midget clown to the T, it's like you were watching me the first time hahahhahahaha
@tkstylem
2 жыл бұрын
this is honestly one of the best motorcycle DIY videos on youtube - step by step very helpful great narration
@ontherebel11
2 жыл бұрын
Thank you for your kind words T, it means so much coming from you, I am so grateful my friend! 🙏
@ThisIsStartingToAnnoyMe
2 жыл бұрын
I only have one complaint: that I can only give you one thumbs up! What a nice job. Clear, concise, accurate, informative.
@ontherebel11
2 жыл бұрын
Thank you so much Ron, I am humbled by your kindness! Thank you king Ron! BTW, I'll always be grateful to you for the risers video, without it, I don't think I would have been able to keep the bike! Much respect! 🙏
@AmerSheikh
2 жыл бұрын
That is alot of work but your demonstration is very clean and loved it.
@ontherebel11
2 жыл бұрын
Thank you Amer! Thank you brother!
@johnaxta1008
2 жыл бұрын
Great, useful video as always. At 11k miles now and needing to change my rear tire. Thanks.
@ontherebel11
2 жыл бұрын
Thank you John! I'm glad it was helpful brother! You are stacking up those miles, well done!
@johnaxta1008
2 жыл бұрын
Thanks again for the video. It was very useful for changing my rear tire this weekend. One thing you may want to note in the video for other DIYers is the retainer clip on the rear brake caliper. Mine fell out with a "ting" and I think I heard the similar sound in your video. So small, it is easy to miss, especially if one uses a drop cloth and no sound when it hits floor -- but a critical part as it keeps the brake pads in place and not rubbing against the caliper. It also says in the manual to use Three Bond 1521 before putting back on (but this is way expensive for how much you will use and I used the Permtex adhesive which should be similar).
@ontherebel11
2 жыл бұрын
Excellent news John, I'm glad you found it helpful! You are right about the ting, it happened to me too! Thanks for pointing it out brother, it will help others! 🙏
@amandla007
Жыл бұрын
Another thank you coming your way. This is a great video! Thanks for your support in the community.
@ontherebel11
Жыл бұрын
Hi Andres! That's very kind of you sir! I'm very happy to hear that you are finding the videos helpful! 🙏
@jeffshootsstuff
9 ай бұрын
Very good video. I have a 500 but there’s a lot here that will help me.
@ontherebel11
9 ай бұрын
Hi Jeff! Thank you sir!! If you haven't already, definitely subscribe to Slight, he has the best Rebel 500 channel on KZitem and you will learn so much! Fantastic guy! kzitem.info/news/bejne/13uerW2ak5mql6wsi=O-IAr1MS8oP52w1-
@ecrusch
Жыл бұрын
I will be using this excellent video to assist me in installing the new Cruisetec tire you recommended. Thank you so much, brother. Your expertise makes our lives so much easier. Peace
@ontherebel11
Жыл бұрын
I'm so glad you find them helpful brother! Please be patient when removing and re-installing the wheel, some have reported that the techs damaged the speed sensor and as a result their ABS light came on. You will be very happy with the cruisetecs, i have close to 10,000 miles on mine and they still look brand new!
@Inconvenient_NPC
Жыл бұрын
Excellent video, thank you very much!
@ontherebel11
Жыл бұрын
Thank you Julian, much appreciated brother 🙏
@paul.aragon
2 жыл бұрын
Wow. Nice detail. Thank you for all the work of documenting for educational purposes!
@ontherebel11
2 жыл бұрын
Thank you Paul, I appreciate the support brother!
@DannySword21
2 жыл бұрын
Man, love your videos, very professional I’m love with my bike and would like to learn how to do all basic maintenance so nobody touch her unless it’s really necessary. Love your videos and recommendations. Very knowledgeable
@ontherebel11
2 жыл бұрын
Thank you Daniel! I'm like you, i don't like anyone touching my bike unless it is absolutely necessary. I will do my best to document the work that i do on the bike to help as many people as possible.
@kennethbyington1100
Жыл бұрын
Love the video’s and your knowledge of the rebel. One thing I’d change is your exhaust pipe looks like a got wounded in battle and needs mercy healing. Lol thanks for your explanation of your how to videos.
@ontherebel11
Жыл бұрын
LOL, thank you Ken, I appreciate your kind words sir! 🙏
@alex377alex
Жыл бұрын
Молодец, хорошие подробные видео👍
@ontherebel11
Жыл бұрын
Thank you very much Alex!!🙏
@tkstylem
2 жыл бұрын
awesome was waiting for this
@ontherebel11
2 жыл бұрын
Thank you TK! Both you and I are approaching to the limit of the dunlops, we need to change them soon.
@tkstylem
2 жыл бұрын
@@ontherebel11 so true… the little circles are about to disappear
@tkstylem
2 жыл бұрын
74lbs torque for axle nut
@chrishansen1323
2 жыл бұрын
Fantastic video well informed diy
@ontherebel11
2 жыл бұрын
Thank you Chris, much appreciated brother! 🙏
@leeroymcevoy5362
2 жыл бұрын
Excellent Video kept simple ..
@ontherebel11
2 жыл бұрын
Thank you Jayson! 🙏
@williamramsey7435
4 ай бұрын
I did my first adjustment today and i cant get the right side of the axel the stay centered in the adjustment plate and it goes crooked when i torque the axle 😢
@ontherebel11
4 ай бұрын
Hi William, I'm sorry to hear that man.... It's hard for me to diagnose what caused it, do you have a chain alignment tool to double check?
@markc19821
3 ай бұрын
Question, so after thus video do we do chain alignment or chain slack? Whats rhe order 1,2,3?
@ontherebel11
3 ай бұрын
Hi Mark, after you install the wheel, chain and chain adjusters, start turning the adjusters to take out the slack in the chain, but have the chain alignment tool attached, as you approach the proper chain tension you are looking at the alignment tool to make sure you are turning the adjusters equally on both sides, continue to make fine adjustments until you have the right slack and the rear wheel is aligned. These need to be done simultaneously, as you will experience as you will do it, while you are aligning the rear wheel, the tension will change on the chain. You'll get the hang of it once you start the process. 👍
@weiwei1808
2 жыл бұрын
Good
@ontherebel11
2 жыл бұрын
Thank you Wei! 🙏
@nomad8160
2 жыл бұрын
hi, I´m thinking about rebel 1100 but I´m 185 cm tall will be good choice for me??? thanks from Slovakia 😉😉✌✌👍👍
@ontherebel11
2 жыл бұрын
Hi Nomad! Depending on how you intend to use the bike, the Rebel 1100 can be customized to fit you perfectly. The first thing I would recommend for you if you plan to ride more than one hour is to buy a Corbin seat. The second thing for someone of your height is to consider forward controls so you can stretch your legs a bit. Once you dial the ergonomics to your liking, the bike is perfect for a sport cruiser. It has the best features in the class and the best value at the price, no other sport cruiser comes anywhere close. The rebel is in a league of its own! The best reliability, the best power, the best handling, the best technology, the best best value! I have 15,500 miles on mine with zero problems, and I love more than the day I bought it! My friend rode from the east coast or to the United States to the west coast and back in 30 days on her rebel 1100 manual, and she had zero issues, she had 26,000 miles on her bike. Do you research, try to test ride one or at least sit on one if possible. Ask me any questions brother, I'm here to help! 🤙
@georgesienny7003
2 жыл бұрын
Do you think it’s possible to do a air filter change I think mines about due,I got about 8000 miles on my bike, your videos are great it gives people confidence !!! Thanks
@ontherebel11
2 жыл бұрын
Hi George! I actually just got my air filter today and I plan on changing it out in the next couple of days! I plan on recording the process if time permits 👍 I'm close to 8,000 as well, the service manual says that it needs changing at 12k, but I'm not waiting that long tbh
@jeffperdue6689
Жыл бұрын
Can I ask what brand of lift stand did you use?
@ontherebel11
Жыл бұрын
Hi Jeff, these are the stands that i use, keep in mind that the rear stand will not work with the stock exhaust without some modifications. kzitem.info/news/bejne/om2Gq4GknHleoaA
@ktly1979
3 ай бұрын
What kind of exhaust is that? Thats how I want mine to look
@ontherebel11
3 ай бұрын
Hi There, This exhaust was custom made, basically just a straight pipe, my recommendation is to find a local exhaust shop and have them make one for you!
@doom3crazy
Жыл бұрын
At 7 min , it sounds like there is some pieces that drop to the ground. What are those , are they important to take note of ? Haha
@ontherebel11
Жыл бұрын
Yes sir, that's the retainer, definitely needed! 😅
@doom3crazy
Жыл бұрын
@@ontherebel11I didn’t see Loctite on your list. Do you need any of that for these specific bolts ?
@ontherebel11
Жыл бұрын
@@doom3crazy no sir, you won't need any loctite brother. 👍
@jlcg6
2 жыл бұрын
good job! Can you tell me the brand and model of that work easel, I'm from Spain and here I don't find such widths
@ontherebel11
2 жыл бұрын
Thank you JL! The paddock stand I'm using is made by harbor freight, I'm not sure if it is available internationally though... www.harborfreight.com/motorcycle-swingarm-rear-stand-65620.html
@augieremigio4274
2 жыл бұрын
Hey man. Nice instructional video you did! Just want to know what brand and model number of that motorcycle stand you using? Thanks man.
@ontherebel11
2 жыл бұрын
Thank you Augie! This is the stand I'm using, keep in mind that it will need to be modified if you have the stock exhaust. www.harborfreight.com/motorcycle-swingarm-rear-stand-65620.html
@augieremigio4274
2 жыл бұрын
@@ontherebel11 I got that one too before but I ended up returning it because the width of it is too small for the rebel 1100. What kind of modification are referring to? Thanks.
@ontherebel11
2 жыл бұрын
@@augieremigio4274 I think I widened it a little, but it's been a while so I forgot.... You can just turn it on its side and hold it down with your foot and pull up with your hands on the other side to widen it slightly. It doesn't need much and the metal is somewhat soft. Also, I added 2 small wooden pieces under the swingarm to be able to use the stand with the stock exhaust, you can see how I did it in the chain adjustment video kzitem.info/news/bejne/kad8lpmCfptegGk
Пікірлер: 62