Such a good series, learned so many new things! Appreciate the breakdown of fireflies and how they occur. I was playing around with settings and not really understanding how they occur, so this was a big help!
@WillGibbons
3 ай бұрын
Awesome! I know it's not the prettiest interior, but glad to hear you found some good insights.
@stefimeow24
2 жыл бұрын
Hi Will! I usually don’t write comments but I want to thank you for your great tutorials. You made me understand very well the basics of rendering so my university life got much easier now. :)
@WillGibbons
2 жыл бұрын
That's amazing to hear! Thanks :)
@junyoungmin545
4 жыл бұрын
WOW! The way you created the windows is totally amazing! Learned so much from your videos!
@WillGibbons
4 жыл бұрын
I'm glad you like that method. I'm lazy and usually don't want to go outside of KeyShot to make custom textures.
@SteveJohnstoneNG3D
4 жыл бұрын
Thanks Will, just finished following your tutorial. Wow, you wouldn’t believe how much I’ve learnt.
@WillGibbons
4 жыл бұрын
Great to hear! Thanks Steve!
@genissala3561
4 жыл бұрын
Congrats Will! Nice tutorial.
@WillGibbons
4 жыл бұрын
Thanks!
@FranckRatier
4 жыл бұрын
Great stuff! Loads of tips and tricks, thanks 👍
@WillGibbons
4 жыл бұрын
Thanks. Glad you liked it!
@samirsadixov
4 жыл бұрын
Thank you Will. This is very valuable. Really appreciate your efforts. Cheers
@WillGibbons
4 жыл бұрын
My pleasure!
@roffencs
3 жыл бұрын
Hey Will! I've just made through this tutorial, all the three parts and I am sooooo thankful for these videos you make. I've only deepdived into Keyshot a few days ago and already managed to do 4 other tutorials of yours about material graphs. I have still much to learn and practice, but you're getting me closer to understand how the magic works... Please keep doing this stunning keyshot tutorials, they are amazing, and so understandable, and just simply the best out there. Wish you all the best, and thank you!!
@d_man_69
4 жыл бұрын
5 years of studying architecture and i see a man make windows without making windows! XD thanks for the tutorial series!!
@WillGibbons
4 жыл бұрын
haha, your comment made me laugh! No worries. :)
@chrisrams3D
3 жыл бұрын
Thanks Will! Very useful tutorial.
@WillGibbons
3 жыл бұрын
Hey Chris, thanks. I'll be quick to acknowledge I have a lot to learn about rendering interiors :P
@chrisrams3D
3 жыл бұрын
@@WillGibbons We don't stop learning, but the information you give speeds up the workflow a lot, good job as always. Thanks!
@AtomicGiulio
4 жыл бұрын
You are just amazing
@WillGibbons
4 жыл бұрын
That's kind of you!
@rifqifirmannulhaq894
4 жыл бұрын
Great tutorial!! Big fans of you! The one and only the youtube tutor with the free tutorial files! Would you mind if I ask you to create an exterior rendering tutorial? Because I don't find a helpful tutorial on youtube as yours. Big thanks!
@WillGibbons
4 жыл бұрын
Thanks. However, I've never rendered an exterior. I think I'd need quite some practice before I would try to create a tutorial on it. Never say never though.
@rifqifirmannulhaq894
4 жыл бұрын
@@WillGibbons Thank you very much for your response. I'll be waiting for it.
@simklem6749
4 жыл бұрын
Thanks👍
@WillGibbons
2 жыл бұрын
You're welcome!
@rg3dart778
4 жыл бұрын
Nice sir 👍 👌
@WillGibbons
2 жыл бұрын
Thanks :)
@achillemeyvis7890
4 жыл бұрын
Maybe you could also do a night scene with only artificial light from inside?
@WillGibbons
4 жыл бұрын
Sure. I'd encourage you to try. All you have to do is delete the texture used to create the window and and that's it. :)
@passirein
4 жыл бұрын
Could you now make an episode, where there is a camera-animation, so the camera moves through the scene a bit?
@WillGibbons
4 жыл бұрын
Good suggestion. I'll consider it for a future video.
@jorgenunez841
4 жыл бұрын
Great tutorial will. It seems I always learn something new from your tutorials. I have a big question do you know how I can render plants and make them look realistic.
@WillGibbons
4 жыл бұрын
Thanks. As I'm sure you can guess, it there are a few approaches. It really depends on the image textures you have and how detailed the model is. Those two things dictate how you set up the materials in KeyShot. It would be a fun video to do, but I'm not sure I'm up for making a plant model and corresponding textures. I'd have to show how I use one from a paid site like Turbosquid.
@jorgenunez841
4 жыл бұрын
@@WillGibbons .. that would be great will. I have a lot of model sets from turbosquid as well. And need help if you would provided private lessons. Let me know.
@irem3198
9 ай бұрын
Can't we just import a wall with a window sized gap on it? Doesn't it will save us time. Super helpful videos btw big thanks.
@WillGibbons
9 ай бұрын
Sure! I just wanted to show a workaround for someone who maybe doesn't have access to a modeling tool.
@ivanloewen
4 жыл бұрын
Great stuff Will, I learned a lot through this series. 400 samples seems like it would take way too long for an interior animation. I'd be curious what approach to take to bring the frame render time down but still maintain acceptable levels of noise and brightness/exposure.
@ivanloewen
4 жыл бұрын
Just to add to this, do additional physical lights add to render time? I've seen comments from other rendering software that using only environment lighting will help keep it fast. Not sure if the HDRI environment lights can be manipulated enough for an interior scene...?
@WillGibbons
4 жыл бұрын
Yes, more physical lights will slow down a scene. To what extent, I'm not certain. 400 samples may seem like a lot, but for most of my client work, I'm doing 60 sec. animations at 1200 samples at either 1080p or 4K. I unfortunately have to rent time on a render farm to make this happen. Just a reality of rendering and this software. You can rely more heavily on the denoiser and render with fewer samples. Or, render it so everything is noisy, and use a plugin like Lenscare by Frischluft and remove noise in post. Finally, you can try GPU mode if you have good GPUs.
@ivanloewen
4 жыл бұрын
Wow, yeah, thanks for the input. I've got a new workstation on order which will greatly help my situation but it's true, at some point I'll exceed even that. The exponential math is real. What render farm would you recommend?
@ivanloewen
4 жыл бұрын
Ah.... found a few options on your resource page that I'm checking out.
@asduvickly
4 жыл бұрын
Hi Will, could you make a video about how to render plants in keyshot? Nice video by the way!!
@WillGibbons
4 жыл бұрын
Thanks! I might get around to it. In the meantime, check out Liam Martin and Sam Does Design here on KZitem. They recently did a plant tutorial in KeyShot!
@rohanzaware1805
4 жыл бұрын
hey Will, this was really helpful tutorial, a question i had regarding the same was, is there a reason you go for downloaded textures instead of amending the ones already present in keyshot using the MG, are downloaded textures generally more refined for them to be of greater utility?
@WillGibbons
4 жыл бұрын
I use whatever texture will best fit my need. You won't find textures for very specific items like the leaves of the plant here or the wood. KeyShot has some good textures, but in this case, they didn't match the vision I had for my image.
@rohanzaware1805
4 жыл бұрын
@@WillGibbons yeah, makes sense, thanks man :)
@passirein
4 жыл бұрын
How does the studio work? it is syncing, so what do I have to setup? Great videos btw!
@WillGibbons
4 жыл бұрын
Yeah, it just changes the environment and turns some lights on and off and changes the colors of them. I can do a video about studios at some point.
@passirein
4 жыл бұрын
@@WillGibbons yeah would be cool! You are doin the best Videos 👍🏻
@joshuasharp3089
4 жыл бұрын
Hi Will, I always use max time for renders - why do you choose samples? Thanks
@WillGibbons
4 жыл бұрын
Because samples are absolute, whereas time is relative to the hardware and your settings. By choosing samples, I'm specifying 'how complete, or how refined' the image is. Whereas with max time, I'm just saying let this render for a specific time and whatever the sample count is by that time, I'll take it. I'd rather be guaranteed a certain level of refinement and just wait for as long as it takes to get there. I hope that makes sense. Good question. Hard thing to answer.
@muhaY-vb5vp
2 жыл бұрын
using samples make the render more consistent if you want to patch the images with lot of changes with region render so you can patch your main image render without re-render whole images
@vorhese
4 жыл бұрын
Been following your tutorials, teaching old dog new tricks, thanks so much. I'm running into a problem every time I add the mesh it's stripes, not a grid and I cant figure out why. Any ideas? I should add that if I keep the mapping as "box" it initially works, but when I select "planar" it becomes stripes.
@WillGibbons
4 жыл бұрын
It's projecting to the wrong plane I assume. Planar can be projected normal to the x, y or z axis. If they're looking like stripes, they're probably projecting normal to the edge of the plane (which has no thickness). Try clicking 'move texture' in the texture properties and rotate it 90 degrees in either direction and it should help.
@andred5536
2 жыл бұрын
Hi Will, when I import the .fbx file of the plant none of the materials are added. Does this all have to be done manually?
@WillGibbons
2 жыл бұрын
Yes, sometimes... it's kind of tricky. It depends on how the model was created/saved. The textures should be in the same folder the 3d model is as well when you import the model into KeyShot.
@wangosteen
3 жыл бұрын
is it just me or does the squares in the mesh only appear under box mapping type instead of will's planar?
@WillGibbons
2 жыл бұрын
You may need to click on the surface to position the mesh in a planar fashion in planar mode.
@wangosteen
3 жыл бұрын
at 6:25 im just wondering how the material graph has all the components within it cos when i tried opening mine, I could only see material and diffuse?
@WillGibbons
3 жыл бұрын
You need to right-click to add nodes, then set the properties for each node.
@wangosteen
3 жыл бұрын
@@WillGibbons thank you
@falancaonat3888
Жыл бұрын
Will be rewatching, thank you for all this info. I wouldnt get that spark in my renders and i think it was 2 much denoiser and not using global illumination at all... 🥲
@WillGibbons
Жыл бұрын
Glad it was helpful!
@jennysmith3239
3 жыл бұрын
I am a woodworker who need help getting my Fusion360 cabinets to appear in photorealistic renderings, for marketing and sales purposes. I am a noob at rendering. I have been using Fusion360 to build cabinets. I usually design kitchens in Fusion360, then nest the cabinet components and have a CNC machine cut out the cabinets. Is it possible to render entire kitchens in Keyshot after laying out exact positions of kitchen cabinets in Fusion360? If so, which file type should I export to Keyshot for a high-quality photorealistic rendering?
@WillGibbons
3 жыл бұрын
Sure, it’s possible. It’s not any different than if you were rendering just a single item, like a chair. A step file is what I prefer to work with. That said, you can install and use the Fusion360 KeyShot plug-in. This way you’ll be able to click a button in Fusion360 and send the mode right into KeyShot
Пікірлер: 69