Well that was easy, thank for the tutorial. Took me 10 minutes, would have spent 30 before I figured out the arm rest pops up.
@hiker64
3 жыл бұрын
This took me 10 minutes on my 2004 Toyota Corolla and that was with the manual door crank using a bandana slid between the plastic washer and door handle to remove the C Clip and take off the crank handle. Thank you so much for this video - Saved me hundreds!
@treasureplanet9082
6 жыл бұрын
Very helpful, thank you! I bought a used Corolla for my kids to drive to work & school. As soon as I got it home, the control cable for the door latch snapped right at the interface to the inside handle. I was able to splice & solder it temporarily until a new cable arrives. Knowing how to disassemble the door cover helped a great deal!!! Next we need a clip to show how to get the latch-end of the cable out.
@LavenderSage73
4 жыл бұрын
This saved me almost $300 that the dealership quoted. Thanks so much for the tutorial!!
@vfherman
9 жыл бұрын
This is the second video I have watched from you. Good job, and thank you!
@0201Poutylips
8 жыл бұрын
Going to do this myself thank you looks easy enough 👍 I need a video on doing the passenger exterior door handle please
@0201Poutylips
8 жыл бұрын
I did just as you said and it was so EASY THANK YOU THANK YOU THANK YOU !!!!!!!!!!!!!!!!!!!!!!!!!
@maries5562
Жыл бұрын
What if it has manual widows? Do we just take off the handle for the widow to replace the door handle?
@antoniomartinez7836
3 жыл бұрын
Thanks brother all done man that was easy I appreciate you bubba
@arthur1543
5 жыл бұрын
Thank You for the video!!! I would have had a hard time finding 2 of the screws. I changed both interior handles in 10 minutes.
@Dav777
5 жыл бұрын
Is this the same procedure to follow for a 2006 w/o power windows or locks? Roll up and the lock is next to the broken latch. Thank you.
@orbitingeyes2540
6 жыл бұрын
Just a tip if you're trying to replace a broken LATCH cable... There are two very different cables, one for latch release and one for the lock, and the service manual diagrams do NOT represent them correctly. The LATCH cable is very flexible and has green and yellow ends. The Toyota P/N for it is: 69710-02020. The lock control cable is less likely to break and has no lead beads on the ends - P/N 69760-02030. These parts are for the driver's door BTW. I found that I had to remove the latch bolts, but did not have to completely remove it from the door to replace the latch cable.
@Pentimenti
3 жыл бұрын
Empowering information thanks 🙏
@Zolboooozz
4 жыл бұрын
How to replace metal wire of right door Inner handle?
@alexf7414
2 жыл бұрын
I did it thanks to you
@agarcia7616
5 жыл бұрын
Mine is not power locked is it still the same way to do it
@georgebarrera0715
3 жыл бұрын
now thjis is epic!!!
@MarcNSac0Sh0w
8 жыл бұрын
would it be the same for a 2009 Toyota Corolla?
@MarcNSac0Sh0w
8 жыл бұрын
just found online instructions on this link, www.paulstravelpictures.com/2009-2013-Toyota-Corolla-Interior-Door-Panel-Removal-Guide/ the way in the video will not work on a 2009
@jinwonjang9199
7 жыл бұрын
Guys, there might be screws at the bottom of the door panel check them and try to pop it. 4:07
Пікірлер: 21