After watching your videos I often get depressed. Why can't all KZitem content be this professional?
@MediaDivision
Жыл бұрын
… and the answer is simple. It doesn't pay of and few professionals have the altruistic goals or just fun with it… unfortunately.
@SyntheticFuture
2 ай бұрын
Making content like this is incredibly expensive. That's why 😅
@MediaDivision
Ай бұрын
@SyntheticFuture not really… most things we do here cost about nothing. It really helps to have friends with studios and equipment of course.
@SyntheticFuture
Ай бұрын
@@MediaDivision @MediaDivision Just the "prop" camera in the intro seconds: DZOFilm Catta FF Zoom 70-135mm T2.9 / 2750 eu Sachter Ace tripod / 800 eu Arri Alexa M / unknown, seems to be so old for cinema cameras there's no value to them. Just that lens and tripod is probably the entire production budget of the average KZitemr. That shot is probably shot on a robot arm (seems to be confirmed later on). And the camera doing the shooting is probably more expensive than the camera being shot. The test setup with the tank isn't exactly cheap as well. If I where to rent a studio like that for a day (I doubt I could to be honest) that's at least a few grand for a single day. (especially considering I'd need to hire someone to operate the robot arm because that's not a skill the average person has. Let alone a studio would allow anyone to operate that sort of equipment). Let's say you work really fast. One day for scripting and shooting everything. For a video with 35k views. Let's be generous and say 11 usd RPM is a 385 usd return (being very generous). So it's basically financial suicide unless you own a studio like that or work at one and your boss is cool enough to let you do this stuff after hours.
@birdonfiremedia
Жыл бұрын
Excellent suggestion for the DOF readout on the handset!
@MediaDivision
Жыл бұрын
I saw it on the Arri divine and thought, how convenient
@sangaoduy6347
Жыл бұрын
The quality of your videos is always one of the best channel I ever seen on KZitem. Hope you gonna make more videos and maybe do some more crazy experiments like you and your crew did before
@MediaDivision
Жыл бұрын
Thanks man… always trying to put something out that is just that tiny bit better - even if it is just a quick test. We just put out something that is a pretty cool experiment two weeks ago. Check out our Pro2be test for a "dry for wet" cinematic experiment!
@PerroneFord
11 ай бұрын
I have been debating this vs the Smallrig unit. I was shying away from this system because of the performance of the previous Nano. Seems like they have made many worthy upgrades. This unit is now in the lead for me. Thank you VERY much for the tests and real world examples.
@vishkumar
8 ай бұрын
Go for SmallRig. This is super buggy product. Cannot recommend it.
@kibakobo
Жыл бұрын
Thank you 🙏man ! Your videos are always pleasure to watch.
@MediaDivision
Жыл бұрын
Cheers man… appreciated!
@northislandnow8858
8 ай бұрын
Where did you guy's go? Hopefully you're still going to make more content. Please!
@MediaDivision
8 ай бұрын
of course... working on three episodes simultainiously.
@MrAllstar
Жыл бұрын
Whoa that’s a game changer for the price, looks rock solid! 🦔
@MediaDivision
Жыл бұрын
I think so too… for that price it is pretty much a no brainer
@MtZionMediaPro
Жыл бұрын
Amazing test! By far the most informative review of the unit I've seen so far. Always outstanding work from Media Division!
@MediaDivision
Жыл бұрын
Thanks man… trying hard ;-)
@4FRodrigo
Жыл бұрын
I don't shoot videos at all, and I don't even intend to get video gear any time soon. However, I can't miss a single video from you. Great work, very inspirational!
@MediaDivision
Жыл бұрын
Thanks man… the remapping of the focus through might make it a cool gadget for photographers, too. Or for people photographing wildlife/shy insects away from the camera
@4FRodrigo
Жыл бұрын
Indeed, I intend to get some vintage gear and this gadget would be very helpful. All the best!@@MediaDivision
@fauland_photography
Жыл бұрын
Oh yes. I will order that one. Thanks a lot for the super nice review. @tilta .... please include more and other camera systems (like Fuji X-H2s e.g.) !!!
@MediaDivision
Жыл бұрын
I’m all for more camera support… give me Panasonic!!! Thanks for watching
@ChristianLeibig
Жыл бұрын
12:10 My unit arrived yesterday. I found, that the Nucleus-N II motor has a lot more strength than the old Nucleus-N. My old model kept going into "Motor Protection Mode" when used as a zoom motor with heavier glass / extending barrels. Yes, even with the super sketchy "D-Tap to Micro-USB cable" that delivers 14+ Volts over the tiny connector. The new Nucleus N-II motor so far handles everything confidently. First tests on a shoot yesterday had it working at 5V same or a bit better than the old Nucleus-N at 14V. When powered with around 8V I had zero issues with the motor not being able to handle lenses, whereas the old Nucleus-N kept driving me mad... Full recommendation from my side. :)
@mrshaheedmalik
10 ай бұрын
Thanks for writing this. I was worried about the power of the new motor. Are you using a dtap to USB-C cable now?
@tetraskele9621
9 ай бұрын
Very impressed with Media Division's presentations. Best in its class for real-world integration, and solid professional presentations; free on KZitem. Can't say enough about this KZitem Channel. Will become a member soon. Keep up the great work, you guys!
@MediaDivision
9 ай бұрын
Thanks a lot for your kindness and for being around... we always appreciate new members that enable us to continue this project. Thank you for your consideration.
@qvarfoto
Жыл бұрын
Fantastic video! Any Media Division upload day is a great day!
@MediaDivision
Жыл бұрын
Thanks a lot man!
@neilfullframe
9 ай бұрын
Just found your channel and the editing is sick 🤯 thanks for this review as it is just what I was needed before purchasing.
@MediaDivision
9 ай бұрын
Thanks man... this is just a quick review. Rather watch our long form episodes, they have much higher production value.
@TheHopelessGeek
Жыл бұрын
Your videos are a treat to watch 😊 Thanks for this 👍🏼
@MediaDivision
Жыл бұрын
Thanks a lot! …for your kindness and watching, very glad you enjoy Geek
@thoreberlin
Жыл бұрын
As the processor seems to be too weak to perform full screen scrolling fluently i'd advice them to just animate a smaller visual feedback element like a line, but fluently. Low FPS or variable frametime animations just don't feel right nowadays.
@MediaDivision
Жыл бұрын
The interface could be snappier and more precise in general… but this is not an iphone. Maybe it gets a bit better with Firmware updates. Still, does it's job
@splotchdog
Жыл бұрын
what I do miss in the old one, and it seems also missing in the new one, is: the abillity to set two points (AB) and allow you to drive from point a to point b automatically in a predfined time with a press of a button. (For motorized sliders) Great Review, thanks.
@MediaDivision
Жыл бұрын
I see… well most motorised sliders have a built in feature that makes it much simpler to program and make complex focus possible to start with. Just two points without perfect timing just doesn't cut it for most shots - especially when you go from close to far, you would certainly loose focus in most of the take. With our Pro2be submarine shots in our last test episode on the robot we had like 20 focus points… all in perfect timing with the movement . So, I think such a feature wouldn't really be helpful… but be vocal about it, I don't think it would be complex to implement.
@andrew_nayes
Жыл бұрын
Wow, 13:22 The DOF Indicator would be such a valuable feature. What was the reaction from Tilta, did they see this feature as a possibility for Nano II?
@MediaDivision
Жыл бұрын
I suggested that in a mail and they weren't "head over heals"… that might change after they saw the video. I don't know.
@mrshaheedmalik
Жыл бұрын
This love the intro music.
@MediaDivision
Жыл бұрын
thanks… me too… kind of a classic for me
@mrshaheedmalik
10 ай бұрын
@@MediaDivisionI went back and watched this episode as I am waiting on the delivery of my Nano 2, with the lenses you use, do you recommend getting the Nucleus M motor for Sekor-C lenses? The intro music is a classic.
@MattSpaugh
11 ай бұрын
Awesome... thanks, as always, for setting the bar on gear review videos. I'm looking for something to provide camera/zoom control for a shoulder rig and I do believe I've found the answer! Keep up the amazing work.
@MediaDivision
11 ай бұрын
Thanks Matt … hope it will do what you are looking for!
@Bo_Hazem
Жыл бұрын
Impressive review. Only $300? That's kinda cheap for how advanced this tool is. Do I need it now? No, but I need more Media Division videos even if you're talking about pets.🤣
@MediaDivision
Жыл бұрын
Tahnks… maybe something for down the road. Our next video is about CATS… "do we need ruthless serial killers in our homes" ;-)
@Bo_Hazem
Жыл бұрын
@@MediaDivision Haha! Actually I love cats, but I don't have pets because I could barely handle myself and family.😆 Hope you the best and your newer videos in 8K might make me push to get an 8K TV sooner than intended.
@PWiessenthaner
6 ай бұрын
Very good Test. I have this tool and for this price - no it is so good and the price is incredeable.
@MediaDivision
6 ай бұрын
I think so, too - te price makes it so accessible. I use it as my remote for all the talkies. What I saved in media by not having to walk to the camera and back to start stop is already bonkers
@buddyfx7026
Жыл бұрын
you and best boy adam are my boys!
@MediaDivision
Жыл бұрын
Glad to hear that… thanks for your kindness and for watching.
@bandwagonbull
11 ай бұрын
Such a wicked review! Thanks for this, super useful 👌🏻
@MediaDivision
11 ай бұрын
Thanks man… glad you like it AND found it useful. Appreciated
@javixo1997
11 ай бұрын
Music recommendations that sound like the Media Division intro? It’s so good
@MediaDivision
11 ай бұрын
Artlist is always a good place to start… our intro is from Artlist but disappeared from the catalog
@JButlerStudios
6 ай бұрын
The film vibes are beautiful
@MediaDivision
6 ай бұрын
Thanks a lot
@247.mp4
11 ай бұрын
My Guy casually using his camera as an armrest. Love the review! Great quality work as always.
@MediaDivision
11 ай бұрын
Thanks man… you are afraid I’m going to crush a camera with the weight of my arm?! I’m not THAT heavy
@CINEAIRVIDEOPRODUCTION
6 ай бұрын
Great video, thank you, but everyone fails to mention the Nano II's achilles heel, is it only has 2 controlling channels, meaning if you want to use is as a fiz or in conjunction with the mirrage vnd motorized filter, you have to use an additional mirrage contoller, or the cluncky optional wheel handle to get 3 and 4 channels, which makes it good but not great. You can I believe use the tilta rs2 handle to contol an extra channel, I am trying that next. But I was hoping it would make the float camera contol easier. I dont see why they only have 2x channels when three would be a min amount I would think. Or add to the touch system to switch the wheel to what ever you want to use the wheel for, that rocker is a bit lame . Anyway thanks for showing your work and how too. I aspire to be half as good, some day. lol.
@MediaDivision
6 ай бұрын
Thank you. Maybe because most only have a set with one motor?! Maybe, because I wouldn't go for a Nucleus II if I wanted such a complex setup. This is a quick and dirty solution at a budget… and it does a lot for that. Never been a fan of vary ND, so all in all… two channels is more than enough for me.
@chrisnguyendop
Жыл бұрын
I love how you're just nonchalantly leaning your elbow on your Bs1h LOL
@MediaDivision
Жыл бұрын
Don't worry, I don't put weight on it and the Cage / Sachtler are quite solid… I could probably sit on it with my fat ass ;-)
@SomewhatAbnormal
Жыл бұрын
Tilta is doing a great job of making professional tools for independent filmmakers at a reasonable price - and this just another example. I already have the Nucleus Nano, but there are many benefits to upgrading. With this unit, I can more easily pull focus on my run and gun Panasonic BS1H rig by having visual feedback. For when I’m using a focus puller (an actual person), the visual feedback will allow them to more easily nail distance changes while I’m moving with my gimbal rig. Also setting A/B points looks super easy. I will make sure to use the affiliate link when I finally save enough money to purchase.
@MediaDivision
Жыл бұрын
If the Panasonic support with camera setting comes in, you are right - NANO II might be a must have for the BS1H just for that. The lack of any display is killing me on that one. Big mistake to not even have a settings display. Thanks for considering our Link!
@SomewhatAbnormal
Жыл бұрын
@@MediaDivision I agree about the BS1H - just a small LED for the menu would have been great. However, since I pretty much shoot in one of two modes (30fps 4K or 24fps RAW) switching between the two modes is simple and something I’ve become accustomed to. I keep the shutter set at 180 degrees, the WB at 5500K, and I always shoot vLog. I feel like the camera was built for just such a scenario where the settings don’t change frequently? My biggest challenge is focus and iris control on the fly which would be much easier with the new Nucleus Nano.
@MediaDivision
Жыл бұрын
Still miss a preset wheel and a screen for confirmation. The BS1H has a cool form factor but is really a camera that is designed for tethered operation@@SomewhatAbnormal
@HardcoreMotors
Жыл бұрын
I despise all that touch screen nonsense. But good to see you guys are still around.
@MediaDivision
Жыл бұрын
Of course we are… you missed our experimental episode 2 weeks ago? The Pro2be episode contains some serious stuff.
@purplemonkeyelephant
Жыл бұрын
That's amazing, to be able to change your focus throw with a click
@MediaDivision
Жыл бұрын
Totally
@LoremIpsumProd
Жыл бұрын
Another movie dropped! This is a good day. Really wish they would release a handle that could control the gear too.
@bbrunorocha
Жыл бұрын
amazing test !! i had the original one and sold when they announced it last year ... My main concern with this new one is regarding motor strength , they told it's improved but not sure by how much. The ability to start/stop is huge for sure, might grab because of that alone
@ListenHereOldMan
Жыл бұрын
i thought i read somewhere the torque's 5x stronger...
@MediaDivision
Жыл бұрын
Torque is 4x stronger according to some testers, but I didn't have a Dtap to USB-C cable so my torque is probably restricted by voltage. It doesn't look like the motor does a PD charging handshake with my firmware. Anyways. Even with the old Nano torque was sufficient with all lenses but one… and that is a real bitch
@lobsterthieved
Жыл бұрын
Always a pleasure to see media division upload :)
@coplandjason
9 ай бұрын
Excellent review, thanks for posting
@MediaDivision
9 ай бұрын
Thanks man… our pleasure
@coplandjason
9 ай бұрын
@@MediaDivision helped me solve the question of Tilta or SmallRig, Tilta seems a better product. Vielen Dank
@SenthilSukumaran
Жыл бұрын
Only just started watching the video, but I want to ask which lavalier mic setup are you using here? And is the room sound treated or are you using software to clean up the voice? I am having quite a lot of echo with my DJI wireless mic in the room in which I film. Even using the revrerd reduction thing in Premiere Pro it doesn't help that much without causing weird clipping artifacts. As ever, you make the highest quality videos on KZitem. Now back to watching the video ;)
@MediaDivision
Жыл бұрын
This is a DJI wireless mic with a shitty lav. My Sennheiser don't fit the DJI as they are screw in. The studio has a massive echo so it is treated with Adobe Podcast AI and that is remixed with the original and than treated with EQ and Compressor in Resole… not good but better than the untreated audio. Hope that helps. Thanks man… and thanks for watching!
@SenthilSukumaran
Жыл бұрын
@@MediaDivision Thank you very much for the reply. I will have a look into replicating this exact sequence of audio sweetening. Convenient to know we are using the same exact mic. Any reason you bother with a bad lavalier rather than using the DJI transmitter on its own (which is what I have been doing). By the way, in case you suffered from that awful, noticeable fuzz/hiss on your audio track when using the DJI mic with the supplied trrs to trrs cable, I was able to fix it instantly by getting a Mogami cable.
@MediaDivision
Жыл бұрын
thanks for the tip… I usually synch with the onboard recording so I don't run into that problem. LAVs are just a little less obstructive in the image and easier to get in the right spot. Mogami cable @@SenthilSukumaran
@SenthilSukumaran
Жыл бұрын
@@MediaDivision I think it is the enoaudio Mogami 2893 Neglex HiFi Stereo Mini Cable | Amphenol 3.5 mm TRS Mini ... from enaudio (in the Mini Phone Cables section). Really nice build quality too.
@shahhzayb
Жыл бұрын
love your videos!
@MediaDivision
Жыл бұрын
Thanks man… appreciated
@VFed0seev
Жыл бұрын
Great job 👍
@MediaDivision
Жыл бұрын
Thanks a lot!
@alexfaimali
Жыл бұрын
As always, great vid! How is the latency?
@MediaDivision
Жыл бұрын
Thanks… I think you can see it in the video very well… look at shots where the hand unit and the motor/lens are in shot at the same time and judge by yourself, as my "Good" or "OK" is very subjective.
@anamorphicalan
Жыл бұрын
always very good content, as head talk hoby vloger, will it auto focus? also what gear notches dose it use?
@MediaDivision
Жыл бұрын
Thanks. How would it "auto focus" without being aware of subject distance? You would need a Lidar system like the DJI for that, but for vlogging internal PDAF and servo lenses work just fine. A motorised focus is good to pull focus in a narrative context - like when an Auto Focus is not aware what should be in focus at what time, how fast transitions should be, and of course, when your lens has no servos. It uses 0.8 Module gearing… like everything I ever used.
@SamuelSotiega
11 ай бұрын
Very good video!!
@MediaDivision
11 ай бұрын
Thanks man! Glad you enjoy
@PaulCorey
Жыл бұрын
Super video!!! Is it possible to do an automated slow zoom-in to a subject's face? A smooth start and finish. I dream of being able to do this 😁
@MediaDivision
Жыл бұрын
Thanks.... there is no way to preprogram zooms or focus that I know of
@PaulCorey
Жыл бұрын
@@MediaDivision Thanks for the fast reply 👍
@loiccardenas
Жыл бұрын
Great breakdown! Love how you include a super difficult assignment to test it out. It's just a shame there's no way to power the motor without cables, SmallRig's Magic Fiz has the option of using an NP-F plate and forgo any sort of cables, which Tilta came up with something like that
@MediaDivision
Жыл бұрын
Thanks… well, these is just no space for a battery that can produce the required voltages for the torque. No system can give you that. You can always rig a small battery with USB-C out. I sometimes use my SWIT batteries from my EVA1 as they have USB out. I push comes to shove, you can Gaff them to wherever
@musicelect
11 ай бұрын
Nice review. The wheel on my Nano just died and I needed a new one right away. They are completely out of stock so I ended up buying the SmallRig Magic FIZ. Really happy with that unit so far.
@danielnajerabetancourt8415
10 ай бұрын
amazing video, I'm new to your channel. So the battery last only 8hrs? Im positive it will last more...
@MediaDivision
10 ай бұрын
Thanks... appreciated. Yes, thats about what we got in a real life scenario. Of course, this will vary with screen brightness and stand by phases.
@camerariggingmods9667
Жыл бұрын
Looks like you end up braking one of the gold pins 😂 I broke two of them on my test unit lol. Good thing they chang the design.
@danielbarrocas62
Ай бұрын
Excellent video as always!!! One question. Is the zoom toggle button "touch sensitive"? Meaning, does zoom speed increase the further the toggle is pushed.
@MediaDivision
Ай бұрын
Thanks a lot.... sorry, but I haven't tried. I only got one motor.
@herzogseth3506
Жыл бұрын
So close to being useful on bigger sets. No way to communicate with the nucleus M, switch batteries, or hard power. This could have been a prosumer hand unit that also could be a solid OCU alternative for a Nucleus M setup. Missed opportunity honestly. That being said, great review as always!!
@MediaDivision
Жыл бұрын
Given the run times, I think the non switchable battery is pretty neglectable and you can run it on usb-c power indefinitely………… that is what you mean with hard power, don't you?! I think this is an alternative to the Nucleus M
@adrinaik93
11 ай бұрын
Seems a great unit. The only thing that I don't quite like is that you have to still power it, which adds another cable to the rig (although I know in the professional environment this is common with lemo connectors, but I'm used to my moza ifocus and its internal battery), and the focus and zoom throw indicators simulating seven segment display numbers seem hard to read.
@MediaDivision
11 ай бұрын
If the motor had an internal battery it would either be gigantic and heavy (in a place where it really shouldn't be) or it would lack the torque that is expected and necessary in the prosumer class.
@adrinaik93
11 ай бұрын
@@MediaDivision It would be bigger, yes, but I don’t think the torque would be compromised. In fact, the Moza iFocus with internal battery that I own has the same (if not more) torque than the Tilta Nano v1 with 12v. However, we have plenty of usb/dtap ports where we can plug it nowadays in our rigs. It’s logical.
@mrshaheedmalik
10 ай бұрын
@@adrinaik93I'm glad it doesn't have a internal battery. Vmount to USB is a thing.
@doncarlos7189
Жыл бұрын
Great Video! Do you know if it is possible to setup two motors, so that the lens is always gonna be in focus when zoomed? A lot of cheap foto lenses are not par focal, so this would be a great option to add. Thanks!
@MediaDivision
Жыл бұрын
Thanks… it is not a feature to map two motors to each other… someone on facebook already had that idea and we tagged Tilta Reps… lets see if that is something doable, Same setup can be used to have focus anamorphic double focus DIY systems. It sound quite cumbersome to set up though. Thanks for watching
@cubul32
9 ай бұрын
Outstanding reviews! Where are you located?
@MediaDivision
9 ай бұрын
Thank you…. Germany
@KaarloMedia
Жыл бұрын
Excellent overview! Such an enticing product, though I'm still satisfied with my fully mechanical follow focus. It's a funny story actually... When I was starting my video career I did some "research" into what I should buy to be a professional. I ended up buying the Manfrotto MVA511FF follow focus unit for 600 (!!!) €. This was ten years ago, mind you, but it's still an absolutely insane price for such a simple device. I think the current 50€ FF units beat this Manfrotto piece of plastic in quality, nevermind the Tilta NN II. But back when I bought it these kinds of things were not available. I still have the Manfrotto unit and use it with my Pocket 4K so I guess the "annual cost" of it hasn't been impossibly bad :D.
@MediaDivision
Жыл бұрын
Thanks man… like I say, I really like mech follow focus, but on a cine lens it just doesn't cut it… my vintage sets have focus throughs all over the place and it is super hard to develop muscle memory without consistent mapping. Motorised focus will do that for you. 600€ for a mechanic FF is really obnoxious these days… lots of good options from the usual suspects, but, I know what you mean… I had several expensive solutions back in the day.
@KaarloMedia
Жыл бұрын
@@MediaDivision Very good point about the muscle memory. Like you said in the review, it would be fantastic to get a list of lenses saved into the TNN2 for a fully consistent throw across a set of stills/vintage lenses. I mean, you can get consistency now, which is brilliant, but a saved list would prevent constant calibration on lens swap.
@MediaDivision
Жыл бұрын
For this feature you don't need the lens data base. After a simple auto calibration every lens has a 360° focus trough… that is enough for muscle memory. Of course that doesn't meant that every lens has the same focus distance at a certain position, but at least you have a similar "sensitivity" to hand movement. You still have to calibrate with a data base, as the motor has to figure out the his starting position after installation. It takes a second an zero effort, so, that is not a problem. The data base would be necessary to show correct distances for focus points… and for features like a "possible" DoF indicator @@KaarloMedia
@KaarloMedia
Жыл бұрын
@@MediaDivision I see! Thank you for the thorough explanation. The auto calibration still relies on the user to set close + infinity points manually on lenses that don't have hard stops, right? This is somewhat of a time sink.
@MediaDivision
Жыл бұрын
of course… if you have a camera with lens data communication, that might be unnecessary. If you don't the data base will not help you. You always have to map the lens to start and end - it can't know where it is "at". I don''t know if that works though… because I don't have a supported camera.@@KaarloMedia
@AfoteyAnnum
Жыл бұрын
Super excited to get one of these. I'm wondering how or even if it can be integrated with currently existing Tilta powered side handles. I'm always looking for ways to slim down my rig, and if i can run the motor off of a side handle instead of a v-mount, that would be ideal (for shorter projects; v-mount batteries are pretty much mandatory on long projects like weddings, etc.)... I don't mind swapping batteries on the Tilta handles if i can use them with this Nano II. Thanks for this video!
@MediaDivision
Жыл бұрын
If you can output enough power (5V 12V 14V) and adapt to USB-C, you can use about anything to power the motor. Thanks for watching
@AfoteyAnnum
Жыл бұрын
@@MediaDivision sounds like a plan! Thanks for responding!!
@mellangestudio
11 ай бұрын
Can you provide the make/model of the nato rail rod adatper you attached the handwheel to rods at 2:02? Thanks so much. Awesome video.
@MediaDivision
11 ай бұрын
Sure: SMALLRIG 3011 Single Bar Clamp Rod Clamp with Integrated NATO Rail 15 mm… no problem, glad you enjoy
@ZeetyBeety
5 ай бұрын
Does it look like the control support for Panasonic would include the EVA1? You are my EVA1 guy as I learn how to use my new to me camera :) Any news from them on the Panasonic support?
@MediaDivision
5 ай бұрын
I don't know… I don't communicate with TILTA on that level. I think it is unlikely that a older system like the EVA1 is on their priority list.
@KillingTheMost
Жыл бұрын
i went with the Smallrig one, before this was even announced
@VictorDmitriev
Жыл бұрын
Me too. But in the spring I decided to base myself on Tilta Nano 2.0. The Smallrig store blocked my account when I exercised my legal right to refuse to receive new follow focus kits. :) Now I use Smallrig and Tilta at the same time, and even see the advantage in this. Because soon I will run into restrictions on the number of channels. We are talking about multi-camera video shooting on stage. If it weren't for the limited number of channels, Tilta Nano 2.0 has all the advantages. P.S. Tilta 2.0 has so many advantages that Smallrig has no chance.
@MediaDivision
Жыл бұрын
This happens a lot… world keeps turning. One doesn't always have to have the newest shiniest gadget. If your focus solution works for you… you are good.
@KillingTheMost
Жыл бұрын
@@MediaDivision I can't remember have you made an episode on wireless monitors? you mentioned shooting yourself and how a wireless focus is a must.
@MediaDivision
Жыл бұрын
No, sorry… due to the high price of zero latency wireless transmitters, I have used SDI cables for that purpose… long SDI cables. As of yet, there doesn't seem to be a sub 1K wireless video system i would like to use. Still waiting for new chipsets (5 years later)@@KillingTheMost
@Shohaiko
Жыл бұрын
Is it possible to map Iris T-Stop Values on the hand unit? This would make a banger dedicated Iris controll for the DP if thats possible
@MediaDivision
Жыл бұрын
I don’t know. If one sets it up in data base I see no reason why it should not be possible, but that feature was not available to me. Screen display will probably be f-stop, but if you now that that corresponds to T… does it matter?
@thedaystripper
7 ай бұрын
Which rod mount are you using to attach the Nano 2 to your 15mm rods? Looks great and would like to get the same.
@MediaDivision
7 ай бұрын
standard nato to 15mm.... I think this was a Smallrig one
@thedaystripper
7 ай бұрын
@@MediaDivision Thanks so much. I'll look into it. And love all the videos! Easily one of my favorite channels. Can't wait to see more!
@MediaDivision
7 ай бұрын
Thanks man... working on the next epic episode to be released by end of February@@thedaystripper
@executerdelta
7 ай бұрын
Moment, du machst deine Videos in Hamburg? hahah wie witzig. Moin!
@MediaDivision
7 ай бұрын
Natürlich… das zieht sich doch recht konstant durch unsere Videos… Alter Elbtunnel etc. Moin
@executerdelta
7 ай бұрын
@@MediaDivision Ich habe ein Set Blazer Remus gepreordered. Solltet ihr Interesse haben ein Video über die Linsen zu machen let me know :) (komme auch aus HH)
@MediaDivision
7 ай бұрын
Danke, aber wir machen solches Marketing-Aktionen die uns Wochen kosten nicht umsonst… Blazer hatte angefragt aber wir hatten terminliche Probleme
@executerdelta
7 ай бұрын
Achso ja verstehe. Hätte ja sein können :) Danke für eure tollen Videos und alles Gute :)@@MediaDivision
@MediaDivision
7 ай бұрын
Unbedingt, und ich Danke Dir! Man tut was man kann und kann sonst nichts ;-) Dir auch alles Gute!@@executerdelta
@supergrammar
8 ай бұрын
Can the Nano 2 communicate with a camera such as an FX3 to allow autofocus with manual lenses by using the camera's tracking data?
@MediaDivision
8 ай бұрын
No it can't.
@supergrammar
8 ай бұрын
@@MediaDivision hmm. wasted opportunity
@MediaDivision
8 ай бұрын
to complex to do such an integration with all the different manufacturers that have limited interest in even having such a system.@@supergrammar
@hichamlrazwani9201
Жыл бұрын
❤❤❤
@MediaDivision
Жыл бұрын
👌
@frannyfranman
Жыл бұрын
Oh dammit. I didn’t realize the pins on the ronin didn’t charge the unit. That’s a huge negative for me. Last thing I need is another battery to manage when I’m already managing the camera battery, gimbal battery and iPhone battery (raveneye). Very lame.
@MediaDivision
Жыл бұрын
Given the fast runtimes it is a non issue IMHO, you can wire it up with USB-C or use the battery grip as well if you need to be permanently on the wire for days.
@frannyfranman
Жыл бұрын
@@MediaDivision I just work on some hectic productions sometimes. Literally just came back from a small crew shoot that had me in the desert for 14 hours a day. Any little hiccup can cause a shoot like that to come to a screeching hault and there are definitely aspects of this follow focus that I wish were better thought out. Of course if it was perfect then why would we upgrade to the Nano III? 😏
@MarcelineFM
6 ай бұрын
Hello, master just a small question, would you tell me what’s the specific name of the adaptador your using to attach the control to the rod, please ♥️
@MediaDivision
6 ай бұрын
15mm rod clamp to nato ... I think this was a SmallRig one
@davidsommeregger
Жыл бұрын
can you switch AF -to MF through the nano2? (: is this little Button on the touchscreen clickable?
@MediaDivision
Жыл бұрын
Probably… when you use a supported camera which I don't have. So, I don't know, but probably
@elliotlowndes5219
Жыл бұрын
Does the mode without hard stops improve workflow using lenses without hard stops? Would be great to see a review that includes such a use
@MediaDivision
Жыл бұрын
I haven't even tried and it wouldn't make sense… why go beyond infinity or short focus?
@elliotlowndes5219
Жыл бұрын
@@MediaDivision A little tricky to explain. I make wildlife documentaries and we often use Nucleus M systems in remote applications where human presence could disturb our subjects. Calibrating the Nucleus M to stills lenses is not very straight forward in the field (challenging conditions, or sometimes the camera needs to be underslung and upside down to get as close to the ground as possible). Using the auto calibration feature on a lens without hard stops requires grabbing the focus ring at precisely the right time to “simulate” a hard stop at infinity for the focus motor. Using the manual calibration method recommended by Tilta often results in less than adequate torque from the motor. If, during the calibration, there is even a slight difference between the calibrated hard stops on the Nucleus M and the close and infinity focus points on the lens, then focus would drift (due to the lens not having real hard stops) over time and we would eventually lose either close or infinity focus. Re-calibration is not always possible due to the aforementioned sensitivity of the area that the remote camera is placed in. You might question why we’re using stills lenses too - there are several reasons: Cine lenses can be too heavy for the remote head we intend to use, not weather sealed for harsh outdoor environments, or too expensive to rent for a typically long natural history shoot. Additionally the electronic aperture control lets us control exposure without adding extra weight of an additional iris motor to the remote head. I’ll save my nostalgia for stills lenses with hard stops for another forum… I asked my original question because in such circumstances where there has been a mistake in calibration, it would be very useful to flip a switch, remove the hard stops on the focus control and regain the close and infinity focus of the lens. Since we mostly focus by eye via a monitor with focus tools applied, this could be a significant improvement over previous nucleus models. Apologies for the long reply but, with the exception of of the Canon CN-20 and perhaps the Pro2be, none of this gear is made with us wildlife folks in mind so we often are forced to use it in ways that seem strange to you fancy cinema folks.
@OnIcePerspectives
11 ай бұрын
Typically the ‘DF’ mode (without hard stops) is for controlling the DJI R focus motor, which is typically used with the gimbal knobs which do not have hard stops. I believe the hand unit will be able to natively control the DJI gimbals in the future, which is why that mode is there. It most likely wont control the Tilta motor in that mode. No tilta motor I’ve seen can infinitely rotate lenses; it always has to have some positional value of 0
@davidp158
10 ай бұрын
I just received the Nucleus Nano 2 motor, control wheel and remote grip. When I attach the control wheel to my USB-C charger, there is no "charging" indicator. Any advice on how to recharge the internal battery? Also, mine unit shipped with a Chinese owner manual. I don't see an English version on Tilta's web site. Does an English version exist?
@MediaDivision
10 ай бұрын
Check the cable… should work… works for us
@davidp158
10 ай бұрын
@@MediaDivision Do you see some kind of "charging" indicator icon? I have a charger that charges other USBC PD compatible devices, so I'm sure it should work with this. I just don't see any sign of the charging taking place.
@MediaDivision
10 ай бұрын
The icon changes to a little plug with bolt when power is applied@@davidp158
@davidp158
10 ай бұрын
@@MediaDivision Thanks. I saw the icon, but read it as “external power” and not as “charging”.
@Ked778
9 ай бұрын
How do you manage to reply to literally every single comment on your videos? You must be working 25 hours a day ig
@MediaDivision
9 ай бұрын
I wish I had that many comments ;-) in between releases there are just around 2 comments per day. They add up over the years for sure. Thanks for hanging around.
@alpenfoxvideo7255
Жыл бұрын
san the motor be powered by the RS3?
@MediaDivision
Жыл бұрын
Yes
@user-rg3uq9ln6g
8 ай бұрын
What parts did you use to connect the wheel to the 15mm rod? Just trying to figure out the best way mount it to my rig
@MediaDivision
8 ай бұрын
a 15mm rod to nato clamp... I think this is a smallrig
@weesh
9 ай бұрын
What is the piece you’re using to mount the controller to your rails at 2:03? Thanks
@MediaDivision
9 ай бұрын
a NATO rail to 15mm rod adaptor… this one is a smallrig I think
@KristophTy
11 ай бұрын
Can you mount the tilta nano II on the right side if using a Left handed side Handle?
@MediaDivision
11 ай бұрын
Why not… you can change all screen orientations on the nano
@lindamace6506
2 ай бұрын
can you use the wheal unit while charging it at the same time?
@MediaDivision
2 ай бұрын
The unit works while connected to power… it is hard to say if the batty is charging (no indicator) or if the system is working when the battery is drained (can't remove the battery).
@quiztasiarocks
Жыл бұрын
Curious how this compares to the PDMovie with LiDAR?
@MediaDivision
Жыл бұрын
Two completely different things as the Tita doesn't have a LiDAR unit.... mayeb there will be a support for the DJI LiDar... which would be interesting
@jessfilmdiaries
Ай бұрын
Would you buy this over a used nucleus M?
@MediaDivision
Ай бұрын
No… different kind of tools, so it depends. M is more for professional setups from the the whole concept. If you are a creator or single shooter, this will be better for you
@emisimk
11 ай бұрын
How it should perform in crowded places with lots of smartphones? :/
@MediaDivision
11 ай бұрын
To many variables to give you a good answer to that
@andrewralte4844
Жыл бұрын
I don't even own a camera yet I'm fully immersed.
@MediaDivision
Жыл бұрын
I feel a future occupation coming… or shall we say… an addiction. Beware my young Padawan from here on out it's only monsters 😉
@Deksvilm
11 ай бұрын
Hi! Have you any issues while powering motor from a gimbal? I bought motor and it doesnt works well when it connected via usb-c to rs2 port. (doesnt calibrate at all and at hard stops start to "jiggling" and becomes complete unusable). But when i use powerbank with PD it works well. Is it just mine gimbal problem or the motor isn't supposed to powered in such way?
@MediaDivision
11 ай бұрын
I have no abnormal function with the RS3 Pro. Might be to little juice on your RS2 USB port
@Deksvilm
11 ай бұрын
@@MediaDivision Thanx for reply! Got it. Then i'll try another way to power it
@user-cp1ri5pm5h
8 ай бұрын
Can this unit trigger record on Black Magic 6k?
@MediaDivision
8 ай бұрын
I don't have a 6K so I can't test
@VideoPine
4 ай бұрын
is it compatible with the nano 1 motor? can you dasey chain with the nano 1 motor and the nano 2 motor?
@MediaDivision
4 ай бұрын
Sorry, it's been a while and I can't find my Nano 1 to try…
@VideoPine
4 ай бұрын
@@MediaDivision I read on voosestore that it's suppose to be compatible with all nucleus motors, that would be amazing, then you have your second motor for the zoom. 👍
@darrenorange2982
Жыл бұрын
I had two Nanos the hand unit failed and leaked fluid. They sucked. Did they fix this issue? I've watched to small rigs system.
@MediaDivision
Жыл бұрын
Leaked Fluid… that can only be the battery. Hardly the Nanos fault?! The NANO II has a built in battery like every phone these days… shouldn't be a problem
@darrenorange2982
Жыл бұрын
@@MediaDivision The fluid leak had something to do with the damping in the wheel itself it leaked from around the wheel both times. Nothing to do with the battery.
@VictorDmitriev
Жыл бұрын
After ordering 4 sets of Nano 2.0, two controllers had to be returned to Tilta - a strange sticking of the wheel after a short period of inactivity. I explain it by the initial period of release of a new device. But the benefits clearly outweigh the drawbacks.
@VictorDmitriev
Жыл бұрын
Are the ergonomics of the Nano 2.0 rocker killing you? Probably why you don't work with him...
@MediaDivision
Жыл бұрын
??? of course I work with the rocker… you can hear it when I desctribe the markers
@EugeneMaynard
Жыл бұрын
👏🏾👍🏾🙏🏾
@MediaDivision
Жыл бұрын
👌✌😂
@havok4615
11 ай бұрын
Kommt ein G9 II Review?
@MediaDivision
11 ай бұрын
Nein... das würde für eine Kamera die primär für Fotografie ausgelegt ist auf diesem Channel kaum Sinn machen.
@havok4615
11 ай бұрын
Oh, ich hab gehört, dass die super zum Filmen sein soll, weil Panasonic endlich funktionierenden Autofokus hat. Aber gut zu wissen. Danke für den Hinweis!
@MediaDivision
11 ай бұрын
Sie hat viele gute video features... ist und bleibt aber primär Foto-Kamera. Wer primär videos macht, ist mit Gh6 oder S5IIx besser bedient... letztere auch mit gutem AF @@havok4615
@camerariggingmods9667
Жыл бұрын
Since your PIN looks broken that's probably why it wasn't charging from DJI gimbal.
@MediaDivision
Жыл бұрын
nope... Tilta wrote me that it doesn't and will not
@camerariggingmods9667
Жыл бұрын
@@MediaDivision How come mine charges from the gimbal then?
@MediaDivision
Жыл бұрын
if it does, Tilta doesn't know their own shit@@camerariggingmods9667
@camerariggingmods9667
Жыл бұрын
So they changed the design and removed the pins because they brake to easy, eliminating the ability to be directly connected to the DJI r gimbals. They also going to have to change the new handle in order to make them work together. And I assume they will have to provide a new transmitter attachment to make all this new gear to be able to control the Gimbal. That's probably why they told you what they told you.
@MediaDivision
Жыл бұрын
@camerariggingmods9667 maybe… I don’t know. I asked them if the pins are repaireable and they said thei send me the battery grip… would make much sense if they changed everything?!
@vahidamini1863
Жыл бұрын
✌...
@MediaDivision
Жыл бұрын
… ?
@Shuttterbugg
11 ай бұрын
Pnly 4000 bucks lol..its gotta be expenive with the oled😊
@MediaDivision
11 ай бұрын
If you watch this it or google it… 300$ ex VAT
@marrowfilms6187
Жыл бұрын
Frankly 8hr battery thats locked internally is pathetic. Esp when the avg work day is at least 10hrs.
@MediaDivision
Жыл бұрын
10+ hours non stop… no lunch break to get you back to 80% load… you don't need wireless focus, you need a union
@marrowfilms6187
Жыл бұрын
@@MediaDivision I am union. But I shouldn't have to bank on having a 30 min break to be able to use my handset. Much rather a 2 secound swap. At least the M lasted nearly 14 with good batts. And in -30 you can just toss a hotshot in your batt bagg to have a back up. Also what's the lifespan of that battery? How easy is it to replace? Frankly we should never be happy about forced internal batts with no practical way to replace.
@MediaDivision
Жыл бұрын
use the battery handle that is available for the device, keep it wired via usb, or stick to the M then@@marrowfilms6187
@Eskey4
Жыл бұрын
3:45 it offers wifey? Finally a affordable way for a filmmaker to get some women
@vishkumar
8 ай бұрын
Stay away from this product. It is not ready for Prime time yet. I bought this on Adorama for my canon R5c. The motor wireless connection is super buggy and glitchy. It takes forever to connect and at times it loses connection. The software is not refined. Tilta rushed this product without proper testing. The "reset to factory" settings doesn't even reset the system. It is that buggy. How funny is that the Tilta website says it supports R5 but no R5C? Sometimes when i press the calibrate button on the motor, it just starts spinning so fast without stopping and it almost ruined my lens and there is no way to stop it other than pulling the cord of the motor. this is a pretty product but cannot be recommended for professional use. Unless you wanna look like an idiot fiddling with this system before the client, go for it. I am returning this.
@MediaDivision
8 ай бұрын
I had non of the described problems.
@RJvidmoto
7 ай бұрын
On my second one....Neither one of them work out of the box. Quality issues and terrible service. Wasted way too much time with this product.
Пікірлер: 234