As much as I love the build montages that you do, videos like this are way more helpful to the audience since we actually get to see the little nuances of building in SFF cases and hear your commentary on them as you do it. More of this!
@nardo446
Жыл бұрын
6
@ayyublakhani2584
Жыл бұрын
@@nardo4467
@pnwenstuff4787
2 жыл бұрын
All of your build never disappoint. Clean and an eye candy.
@EyadAlAkkad
2 жыл бұрын
clean and sexy!
@gucky4717
2 жыл бұрын
It's really an awesome build. But im still hoping for a Tophat like the Ghost S1 for my NR200P. Or a taller revision said NR200P for an additional 280mm AIO at the Top. The NR200P is not THAT much smaller and I don't like cramming everything in like that. There is also the Krux Naos which is almost the same as the NR200P 22L vs 20,3L, BUT has room for a M-ATX Board and an ATX PSU at the same time. I'd consider those to entry level SFF, while the DAN A4-H20 is Mid/High Tier.
@radiantav
2 жыл бұрын
This is super nice, that front cutout is a master stroke. Visually looks so clean and while ports area detracts a bit there, I know from practice it's very useful to have those ports available.
@samueltriplett
2 жыл бұрын
I really enjoyed this video where you don't have everything already figured out and optimized. Seeing the snags and bumps you run into and how you figure out ways to solve those is great!
@ericchoocl
2 жыл бұрын
Totally agreed. Loving this trial n error format but not draggy… which is good!
@ClintStrickwood
8 ай бұрын
Just so you know, a RTX 4090 FE and MSI Ventus X3 4090 will fit in this case. I have the FE personally and the temps are splendid.
@blackice364
21 күн бұрын
what cooler do you use? and what is noise like?
@neobscura
2 жыл бұрын
The building may not be as fluid as your other videos but seeing you working your way into the build as a first timer is SO MUCH more insightful. I like the step by step as someone who's considering SFF but scared to fumble my way into it, this is very interesting.
@Wellibob68
2 жыл бұрын
When I first starting watching this chaps videos (about 2 years ago) I thought he was a bit arrogant. However it was me at fault and this guy really knows his shit with small form factors and pc's as a whole. I'm proud to learn from this man. Cheers.
@93836
2 жыл бұрын
@yousef alsammarraie Totally agree. Being able to spot other smart people who are at the top of their craft, that is a skill in itself. It can enable you to find great people to surrounding yourself with, who can help you out with your own hobbies and projects.
@KingLamink
2 жыл бұрын
Did my first itx build just the other day after finding your channel. Chose the meshilicious, and not regretting it one bit. Absolutely loving it so far
@indridcold2840
2 жыл бұрын
NGL. I subbed this channel years ago on an old account just as much for the beautiful shots as the quality content. Keep up the awesome work mate. Cheers
@ErronKebabb
2 жыл бұрын
Damn yo thats bussin Wouldda been KINDA suss if you just subbed this week or sumthn.. ngl
@xninefoxx8874
2 жыл бұрын
As always great video! Like you said, it's nice to see SFF case makers standing up to the big GPU challenge and trying to make it as compact as possible. I'll wait for the next gen GPUs and hopefully a bit later, we'll hear more from the "Ncase M2" concepts. I can't wait to see, what Ncase will do next!
@Z4KIUS
2 жыл бұрын
it's the worst thing, causes cases to get huge for no reason and yet most of them can't handle CPU cooling anyway
@Grimmwoldds
2 жыл бұрын
It would be better for them to make an actual liquid cooling case. Saying you can use an AIO and a bulky 3 slot air cooled GPU isn't liquid cooling, it's just an AIO like practically ever PC case on the market. Either make a tiny tiny tiny case with bulkhead connectors and a matching rad/pump/psu stand, or make the case with a space for pump/res and focused airflow through a rad or two.
@imnotusingmyrealname4566
Жыл бұрын
Now with next gen GPUs out you should buy previous gen GPUs.😂 Man I hate the PC market right now. Sadly this seems to be the new normal.
@imnotusingmyrealname4566
Жыл бұрын
@@Grimmwoldds I prefer air cooling. SFF PCs are expensive enough already and air cooling is more reliable and longer lasting. Smart designs for air cooling is what I want.
@eaaeeeea
2 жыл бұрын
The first good review of this production ready model of Lian Li - Dan A4-H2O. Excellent work Optimum Tech! I'm going to buy it, hopefully they ship fast.
@dylanw1691
2 жыл бұрын
I pre-ordered the case within half an hour watching your video. Super impressed by its low-profile design and non-compromising hardware support. As always, great video, looking out for more!
@diedenieded3831
2 жыл бұрын
The flipped GPU layout is absolutely genius! One of the biggest problems I've faced when building in a Ghost S1 knockoff is how the GPU power cables are either brushing up against the fan, or are really pushing against the AIO tubes. Installing a GPU is also a nightmare, since you have to unscrew the PCIe riser from its mount point just to have enough space to put the GPU in.
@aculturedman.9172
2 жыл бұрын
Just got mine in the mail today. I love how this thing actually fits in my backpack and is just a tad bit wider than my dell optiplex work PC, but can fit a dang 3 slot GPU lol. It’s insane and built very well. Can’t wait to build in it.
@UsnRoberts
Жыл бұрын
what backpack does this fit in?
@EdwardWongHauPepeluTivruskyIV.
Жыл бұрын
@@UsnRoberts my thoughts exactly...
@alexsiniov
2 жыл бұрын
Man I love your tiny builds. thinking about fitting my all monster stuff into small case like this
@cappythule4061
2 жыл бұрын
i love this format of build video! the kinda natural step by step is just as fun as watching your montages! very easy to listen to
@Metabrotropic
2 жыл бұрын
I freaking love how real this video is.
@mattpedro4570
2 жыл бұрын
I love the aesthetic of this channel, everything is so clean and well considered
@Stallnig
2 жыл бұрын
This is the perfection I've been dreaming about. I tried to CAD something similar but with glass sides, and it is close to impossible to make a clean design, just drove me crazy. I'm interested in seeing a full water cooled build.
@mangamikecospla
2 жыл бұрын
Super slick man, love your reviews, you pick up on some me great detail. Really missed your case reviews and it's came back with a bang with our favourite manufacturer Dan.
@nohpleft
2 жыл бұрын
really nice to follow you along as you’re installing everything. love the format, thank you.
@RetroPlus
2 жыл бұрын
This is one of the better compact cases i've seen, the design is really smart
@balazskovari4814
Жыл бұрын
Couple of things that can make building in this case easier. 1 - slim fans (with grilles) (also solves a potential issue with screws interfering with the chassis crossmember); 2 - consider pull instead of push (or even (dare I say) as intaake); 3 - pipe length > 400mm will allow routing them at the bottom (eg. DeepCool LS520SE); 4 - SFX-L is not a good option
@MrMooMoo89
2 жыл бұрын
Pressure on the ram was a big issue for me, was getting random hard freezes. All issues stopped when I moved the tubing side to the VRM side.
@partyloco
2 жыл бұрын
Last week I cleaned my PC with an air blower and it didn't boot up. It was the RAM. Damn, if they're delicate.
@luke5957
2 жыл бұрын
Yeah over time that's gonna rip the board traces up
@RetroPlus
2 жыл бұрын
Motherboard manufactures really need to allow for more space on their ITX boards
@gibanica4854
2 жыл бұрын
Thank you Mr. Optimum Biceps for another epic vid.
@justmakemeaname
2 жыл бұрын
Its a good day when optimum tech uploads.
@mt423
2 жыл бұрын
Nice choice using the EK 240 Basic, I love it only uses a 4 pin header to power the pump instead of a SATA power cable found in AIO coolers due to RGB lighting. Just having 1 less cable to deal in a cramp build is a plus to me.
@CoyoteMilkwater
2 жыл бұрын
You have reviewed and built so many itx cases over the years and you’re the sole reason I have an itx build currently. I am curious though as to why you haven’t built in the Lian Li Q58 yet?
@nayanpitlam5621
2 жыл бұрын
as someone waiting for formd t1 v2 this is suuper tempting 😌
@Aexeq
2 жыл бұрын
I feel you... H2O might still be fun to play around with some beefier 240 rads + full size fans.
@yoruneko34
Жыл бұрын
the photography in your videos is always bonkers good
@MichaelChan0308
2 жыл бұрын
Many are not going to like this but I would prefer a NR200Max sort of a bundle here. With Lian Li SFX PSU with custom sleeve cables and basic AIO which has custom length tubing and wires, pre-routed. Fan guard is cheap and could be an meaningful add-on. Or just flip the rads and fans placement. Some may prefer the option to support top 280 AIO too and I imagine that wouldn't made the case much larger, and cable management would be a breeze. It may also make installation of mammoth MSI Suprim cards possible, which is 336mm long. Excellent build btw, and I bet only with biceps like yours can we squeeze the AIO and PSU into place lol
@lentwood
2 жыл бұрын
Unironically, I have started actively checking my sub box every couple of days just to see if you've uploaded - you've inspired me to build 'SFF and Im already onto my second one (LianLi Q58) Absolutely loving your content! Keep doing what you're doing!
@EmersonCloud
2 жыл бұрын
Cool video. I liked hearing your thoughts while building in the case
@emp1985
2 жыл бұрын
Went with the Meshlicious and I'm telling you, I'm never building anything outside this case. The desk-real estate savings on a ITX tower is way too nice, something these ITX formats can't offer. The Meshlicious, with very little mods, can accomodate two 80mm fans (back in GPU compartment, in 4-slot mode) and a 92mm top exhaust. It's compact and chilly AF like this. I even went with a Thermalright AXP-90 X47 for an air cooler on a non-TDP-limited 11400, and it's working perfectly. Should cope just perfectly fine with a non-k 11700/12700 as well. Awesome video though!
@ChrisWEEZ
2 жыл бұрын
How loud does it get?
@martin28bln
2 жыл бұрын
Same question like above. Which temps do you get while gaming with 80 to 100W TDP? Thinking of testing the AXP90 X47 with a 12700 - at the moment on 240er Rad in FormD T1.
@svn5994
2 жыл бұрын
Nearly 16L and can only fit a single rad + GPU is not a worthy case to be bragging about.
@ls.vinicius
2 жыл бұрын
I love this channel. Sadly I don’t have many case options in my country
@gregmartel407
2 жыл бұрын
Glad to know this case's got perfect cabinetry!
@markwoll
10 ай бұрын
Just did a build in this case. Thank you for the detailed build video. It was very helpful. There is really no room for excess cable. And I am using a fairly short 2 slot zotac 4070.
@MD_Production
2 жыл бұрын
This case is so minimalistic and that is what I like about it, Great build as always ❤
@ElTeeger
2 жыл бұрын
Very nice video. I've been more fond of smaller cases that can fix bigger gpu and don't compromise performance. thank you for this.
@spudboy1234
2 жыл бұрын
An undervolt on these Alderlake chips is a must. Once you get it dialed in the power draw and heat output is way lower for the same performance.
@Girvo747
2 жыл бұрын
Yeah the out of the box power draw is bonkers, basically solely done to beat AMD in benchmarks - gaming performance does not need it at all!
@andrewwilkinson5776
2 жыл бұрын
I love your new format with a build/ tear down. I get why you avoided it because it's very common in low quality videos but I'm sure you now know what you're doing.
@stephenpascua9792
2 жыл бұрын
I've had the Meshlicious, and that choice was greatly influenced by your videos! Though I would love to see how the A4-H20 sized up with the Meshlicious side by side
@amtypaldos
2 жыл бұрын
Excellent build! Can't wait to see the custom loop in here!
@ShinobiRaijin
2 жыл бұрын
Waiting for this, your review of this case 💘💘
@beckmann930
2 жыл бұрын
Nice Video Ali and nice Case DAN!
@twnlumh
2 жыл бұрын
Ordered mine today directly from Lian Li! So excited 🤩
@jablue4329
2 жыл бұрын
Oh boy, I've been waiting for this.
@igor.lacerda
2 жыл бұрын
Another well-made SFF case squeezed in a volume rank! Great review as always! My main PC is on my first SFF case which is a NR200P, waiting on a old NCASE M1 (v3 I guess) and a Cougar QBX, want to see if can get my hands on some DAN cases here in Brazil as well! Cheers! 🤘🤘⚡⚡
@IamMxfia
2 жыл бұрын
wow a 22 minute Video, my day is saved 🤩
@busterscrugs
2 жыл бұрын
Neat little case. I love being able to pack powerful hardware into a fraction of the space. ATX full tower cases are such a waste of space.
@TheGryskiewicz
2 жыл бұрын
I'm blown away that this man only has 500k subscribers.
@Shane-fk2gz
2 жыл бұрын
Man, those Trident Royals are gonna BAKE in that case.
@PabzRoz
2 жыл бұрын
I love this case I want it, it's so tiny lol. I love your content you inspired my next build to be an itx. I'm obsessed with sff now.
@evilcab
2 жыл бұрын
this heals me after that massacre that bitwit did to his build using this case.
@zykablyad941
2 жыл бұрын
just saw that video, omg that was scary to watch I am sure that the air hose would pop out any second.
@Just_Call_Me_Tim
2 жыл бұрын
I've been looking for a case this size. Hopefully I can nab one up. Aesthetic AF build as usual man! Cheers!
@g14_jojo33
2 жыл бұрын
Hay man, Thanks so much for your Content. It inspired me to try bulding my own small formfactor pc and watercooling it (meshlicious, 2080ti (best available for under 1000€) and 5600X), both i´ve never done before. It was great building it and I enjoy it every day. thank you again and greetings from Germany :)
@hallowieners
2 жыл бұрын
Managed to snag a silver pcie 4 version from aliexpress through lian's official store. The black ones are still out of stock on there though. Also have to pay for VATs and shipping so it ended up being around $190.
@zhima_ca
Жыл бұрын
Thank you for the clean and sleek pc build videos. Really helped me a lot
@weeq326
2 жыл бұрын
This was my 2nd ITX case, and it was the easiest build ever! RTX 3080 TUF no problem. And you can fit all 4motherboard screws with IFixit extension cable using their screw driver!
@salsashreenee6887
2 жыл бұрын
Built mine and have been working great for the last month. 12700k & ROG Strix 3080Ti with a SF750
@BenyaminLorit
2 жыл бұрын
The building experience feels like an absolute nightmare but the end product looks so good. For most people, I feel more comfortable recommend the NR200P (both max and non-max) but I can definitely see a lot of SFF enthusiasts going for this.
@DontEatCream
2 жыл бұрын
That assembly looks like a colossal PITA, not gonna lie. Kinda makes you wanna just buy a NR200P MAX and call it a day
@illietw
2 жыл бұрын
Had the same issues with tube clearance in my FormD T1 using EK AIO 120 and Trident Z Neo RAM. The tubes weren't long enough in my case (shorter for the 120 version, do not recommend), and the RAM was in the way on the right side, what a pain :) It all fits in the end, but the tubes are stretched and pressing on the RAM a bit, but no issues after almost a year. Would be very interested to see you do a custom loop in one of these. I actually really like seeing you try around a bit, and deliberate how to proceed.
@17t
2 жыл бұрын
Horry I've been waiting for this video for half a year🙌
@ianlamp3127
2 жыл бұрын
God I love Optimum tech.
@DanielKaspo
2 жыл бұрын
Love the video - just noticed it's not shot at a 16:9 aspect ratio - took me by surprise!
@kraftwels
2 жыл бұрын
when i first heard about this case it seemed like the case of my dreams and i was eagerly anticipating it's release. Ironically the case i actually got was it's slightly bigger brother, the q58. The A4-H2O looks great and i like the dimensions, but the q58 is my endgame. The design, the performance, the hardware compatibility and surprisingy the build process are amazing in the q58 and i'm never letting go!
@rayqand5068
2 жыл бұрын
Can I ask what radiator and GPU you have ? Really keen to see if this can fit the arctic 280mm AIO and the powercolor red devil 6800XT. Both are on the absolute edge of maximum dimension reported for this case. Keen to see what your experience was !
@skytreegirl6929
2 жыл бұрын
The q58 sucks lol 😆 such a big case for a sandwich layout
@rayqand5068
2 жыл бұрын
@@skytreegirl6929 yeah I’m keen to see what if any are the advantages of the q58 seeing as on the website it’s listed as having the same max radiator dimensions (315mm) and slightly shorter GFX size (320mm)
@skytreegirl6929
2 жыл бұрын
@@rayqand5068 ok professor thanks for the math lesson 😑 😒
@rayqand5068
2 жыл бұрын
@@skytreegirl6929 umm ok? Mf waiting to get offended these days. Gtfo of here
@beefwantko7269
2 жыл бұрын
one thing that ive noticed over the last months, with mining and just power supplies in general is that sure you can run a 750 watt, even a 650, but when it comes to effieciency, your loosing about 7-11 percent when your maxing out the power supply. ive heard it before once or twice but really you do want to figure out your average wattage, and get a psu that is going to be running at 60 percent, the power curve is at maximum effiecency in that middle curve area, and with you being a lot about efficiency and noise .. it will help with both of those. so buying a psu with 30 percent headroom is honestly preferable
@93836
2 жыл бұрын
I have a 2007 BMW that I love. And the only area of the car that ever gives me trouble is the water cooling parts. It’s the reason the car goes to the shop once a year, often towed on a flatbed. Cracking hoses, leaking fittings, and failing pumps. Destroying other components of the car in the process, and immediately making the car un-drivable. So, I’m not exactly eager to add liquid cooling to my PC. Especially since the air cooling works so well. I have an RTX 3090 FE, Ryzen 5900x, cooled with a Noctua NH-D15S and Noctua 140mm case fans. Everything runs whisper quiet, GPU runs at 66°C and CPU around 72°C. All on quiet air. But, it is tempting to try liquid cooling to fit everything inside a tiny case. But I already have the system working well inside a larger Fractal Design case, and I don’t really want to mess with it. Haha.
@BomimoDK
2 жыл бұрын
I still feel like the formd T1 is the absolute king here. I got it after you showed it and everything is just perfectly fitted. closes tight and securely without things clattering from being loose or bending from being too tight.
@triliner254
2 жыл бұрын
Finally you got to testing the EK AIO. I was wondering when you were gonna buy one.
@user-zw6hf9rj6y
2 жыл бұрын
I have an 11-liter air-cooled case right now. If in the future I gonna to do a water cooled version I think I will choose this case.
@nathanbraun2067
2 жыл бұрын
I like it. Looks sleek and and unassuming, and no cringe rgb
@niospartan
2 жыл бұрын
After getting the meshlisious ive started to feel the horizontal style cases just take up more desk space than needed. I think the vertical style is much better as far as space goes.
@c.m.7037
2 жыл бұрын
💯
@skytreegirl6929
2 жыл бұрын
the ssup is too big
@swizzler8053
2 жыл бұрын
@@skytreegirl6929 just like the hyte revolt 3.
@swizzler8053
2 жыл бұрын
Wanted to get the meshlicious but i am glad I went for the NR200P.
@retrorevival1
2 жыл бұрын
just don't put it on your desk? easy
@Zombie101
2 жыл бұрын
FINALLY a DECENT SFF we can get hold of
@Youskarumbo
2 жыл бұрын
Case looks great and I love that u don’t need to mount the motherboard upside down for a cool open case look. Only thing I wanted to see is a TG panel option. Missed opportunity there. Overall great itx case that’s affordable.
@JohnDoe-xp4iy
2 жыл бұрын
That is a perfect size PC. When I build my next one, it will probably be with this case.
@benjaminnyman8687
2 жыл бұрын
Been waiting ages for this case to release
@guffey1989
2 жыл бұрын
Looking like this will be the perfect replacement for my Silverstone SG13, being able to make the jump to 240mm AIO while keeping essentially the same volume.
@bolin6297
2 жыл бұрын
GOD i'm falling in Love what you build ....
@Drone443
2 жыл бұрын
Hey guys if you're looking for this case I found both colorways on AliExpress, only the Gen 4 cable though. It's sold from the official Lian Li store there
@ThatUnfunGuy
2 жыл бұрын
This is a super impressive case. It's essentially the size of a PS5, insane!
@julianr.6073
2 жыл бұрын
A perfect portable esport Setup
@kuzzzzzzzzzzzz7511
Жыл бұрын
This dude always building ideal itx i hope you gonna giveaways before the end of the year 🙏
@hhc1205
2 жыл бұрын
Love your sff contents. More please!
@IcalebthelionI
2 жыл бұрын
Really love how clean this case looks. Would consider moving my Meshlicious build into this but wouldn’t get me to move out of the M1
@bettsdn
2 жыл бұрын
Beautiful case. Side panel shape reminds me of my Sliger SM550.
@Blackleaves
2 жыл бұрын
Is there a point to try installing fans at the top of the case instead of the radiator? Cables will not affect fans, but there will be a bit longer tubing. Also airflow should not be that affected because of "walls" around radiator.
@benbunch4159
2 жыл бұрын
Strong push pins seem to make sense so that you can have tubes crammed up against it without the sides popping off.
@suprimx3130
2 жыл бұрын
Hope you can review next the Geeek M5 once it’s out! Looking forward to it
@DennisBLee
2 жыл бұрын
Maybe I'm being dense, but would it not make the most sense to rotate the block counterclockwise 90 degrees and have the connectors facing the top of the case? Also I'm sure that the VRM heatsink and IO shield cover could be removed and replaced with a smaller heatsink if needed.
@jolness1
2 жыл бұрын
Love seeing this being made in volume to lower the price. If I didn't need add in cards (mainly 10Gbe) I would have one of these.
@ajrsabbagh
2 жыл бұрын
Title and description calls it the A4-H twenty, when it is supposed to be A4-H two O.
@DAN_Cases
2 жыл бұрын
true
@riomendoza1111
4 ай бұрын
I want to build this so bad. Im gonna sell my MBP and switch to PC cause this little thing looks amazing snd its crazy powerful. Just what i have been wanting.
@dunderdotten
2 жыл бұрын
I got this case yesterday and i was planning going aircooling (moving from my NR200P) but even with aircooling it IS a challange. I would really ask friends who is looking at this case to give it a second thought since it IS really small. Def. not a first SFF case to get if you are "new" to sff builds :D I am really amazed about Optimums work in getting his customloop installed. Respect.
@Pharesm
2 жыл бұрын
bah, don't scare off people.. Anyone with an IQ over 100 should have no problem...
@ulmwurttemberg1682
8 ай бұрын
3:36 I decided on air cooling. All good thus far. I don't know how to create a hard tubing system and the thought of "tube routing" when the tubes weren't specifically made for my setup turned my stomach. Too much forcing things to fit and settling for whatever layout resulted. If there were water cooled systems that allowed you to modify tube length...
@JekoJuice
6 ай бұрын
When I build a new pc I’m 100% getting this case
@gizConAsh
2 жыл бұрын
I think the word you're looking for is fitting. Fitment is a noun. Used to refer to immovable objects around the house, e.g. furniture.
@storm91229
2 жыл бұрын
This is a nice clean build in a case that makes it look easy to. I’m planning on choosing this for my first build. I’m confident your many tutorials would help a lot but one part of DIY PC building that I dread actually and foresee to be a challenge for me would be cabling (i.e. fixing cables into their right places/points on the motherboard). Could you do a video on that please? I’m sure myself and other nubes can really use one!
@AustinZehenni-jj8xz
2 жыл бұрын
**Optimum Tech** I'm a big fan of your channel. My first ITX build was a Dan a4sfx v2 with the second iteration of the Asetek cooler with some modification. I wonder if the cooler tubing could have been run around the bottom of the case. So placing the inlet/outlet of the water block at the bottom of the case/mobo and run it around The PSU. The tubing is probably not long enough but if it were me thats how I would try to run that tubing. Just a thought. Love your videos. Hope there are many more new ITX products to review to keep you going. 👍👍
Пікірлер: 870