brotha, literally just got my dr10m finished up this past week. Programmed my receiver and set the esc to my radio and made my first hits today with my brand new drk set up. This video is gonna help me sooooo much with understanding the logs in maclans software. Thank you very much!!!
@FullThrottleRC
2 жыл бұрын
Awesome man!! Good luck, the car is impressive!
@davidkeithboomer4112
8 ай бұрын
I'm running pretty much the same set up on a rear motor set up hasn't had no problems I appreciate the knowledge it helps thanx
@FullThrottleRC
8 ай бұрын
Awesome! Glad to help!
@STAHUMGRINHRD
2 жыл бұрын
Thanks im new to the NO PREP world your videos are super helpfull
@FullThrottleRC
2 жыл бұрын
Thank you for the support!!
@edwardgrant2717
2 жыл бұрын
Great job, Great vid, and please keep showing everything your learning, like looking at data and knowing where to add power, Thank you so much.
@FullThrottleRC
2 жыл бұрын
Thank you! I enjoy trying to help other people learn with me
@edwardgrant2717
2 жыл бұрын
Hey good day to you, want to try to help you with steering, don’t know what remote you have but if you can drop your End Points down to 60R 60L and turn dual rate down to 80% are so..speed 70-80%, it will help over correcting💨💨
@FullThrottleRC
2 жыл бұрын
@@edwardgrant2717 Thanks, my end points are actually lower than that as well as the speed. I just have a heavy hand and need to dial that back a bit hahaha
@edwardgrant2717
2 жыл бұрын
I’m 2.24@65..90/18 bout to try 90/20 now chasing 70mph, how did you like that 84T? Need top in, I’m new to this just test a lot!!
@GhostRider-ii7tz
2 жыл бұрын
Awesome video.really great info.i never knew about the spread sheets.that will help me in tuning.i have been really contemplating on getting that chassis.
@FullThrottleRC
2 жыл бұрын
Thanks! Those spreadsheets have helped me a bunch!
@rgishire
2 жыл бұрын
Thank you for sharing what you are learning I just started this noprep hobby and have a Drk system and know nothing about it so I enjoy watching your video allot of people are scared to let you know their tune lol like I’m racing against them so it’s great that you are sharing
@FullThrottleRC
2 жыл бұрын
Hahaha yea I get that but if we don't help others in the hobby learn the hobby will die out. I like helping. Thank you!!
@rgishire
2 жыл бұрын
@@FullThrottleRC thanks I get notifications whenever you upload lol need all the help I can get
@claybrown1619
Жыл бұрын
Cool deal Brother 👍
@FullThrottleRC
Жыл бұрын
Thanks!!
@luiszapata7500
2 жыл бұрын
is awesome what you are doing, really helpful. just got the Maclan 3.5t and esc
@CoachD386
2 жыл бұрын
Good stuff, i would shorten the stages i.e. 37% 45% 54% 64% 75% 89% 100%… i was noticing your first two 37 to 55 between stage 1 and 2. I’m definitely liking the performance of the DR10M though 💪🏾💯🔥
@FullThrottleRC
2 жыл бұрын
Yep that's something I started to smooth out towards the end. I'm loving the car so far. I want to get a little weight further forward but it's been great so far
@CoachD386
2 жыл бұрын
@@FullThrottleRC Niice bro
@RazorRoo1989
2 жыл бұрын
Its coming. I finally got mine straight and I been adding very little power. Now I see she can take it I'm bout to see what she does.
@FullThrottleRC
2 жыл бұрын
Learn from my experience. Don't add it all too quickly hahaha! Keep going a little at a time
@The918OBS
2 жыл бұрын
Happy 4th brother and congratulations on your new pb I love how you explain everything on the drk160 for the Folks that don't know looking great man .ps you'd be very surprised how much more you can bump up your start power from the 30s you have it on now .just a hint I'm leaving at 48% in one car and 50% in the other car . 😉👍🤘💪
@FullThrottleRC
2 жыл бұрын
Thank you! And nice! That gives me some promise that there's definitely some faster times in the car!
@The918OBS
2 жыл бұрын
@@FullThrottleRC o yea for sure your car is gonna roll out brother
@robsrcinsanity1220
2 жыл бұрын
Wow, I didn’t realize there was so much to this! Good stuff 👍🏻🍻
@FullThrottleRC
2 жыл бұрын
Thank you! There's a lot that goes into it. Which is why is so hard to complete with the fastest!
@alrtgy9642
Жыл бұрын
Great info.
@TheBlueberry606
2 жыл бұрын
I would like to see what spring rate effect has on squat 🤔 👀 and stearability.
@4xELEKTRA
Жыл бұрын
starting tuning tonight. this video helped alot
@FullThrottleRC
Жыл бұрын
Awesome! I hoped these tuning videos could help others out
@4xELEKTRA
Жыл бұрын
@@FullThrottleRC they are. now once i stop crashing ill be good lol
@JorgeGenaro.
Жыл бұрын
Pinks to the products? Just got into rc and looking to put together a funny sleeper
@FullThrottleRC
Жыл бұрын
Here's the tablet I use. amzn.to/44aA7Sy The ESC is the Maclan DRK, it's available from a bunch of different sites so if you just search for it you can find the best place for you to buy from.
@luiszapata7500
2 жыл бұрын
Haha, nevermind you did mention you stripped the 92, but what pinion were you running with it, thanks
@endosrc
2 жыл бұрын
speed zone has a 1.5t motor. I’m sure the mmx8s could handle it. I think the drk and the 3.5t motor could prob go in the old car if you wanted to do a massive power upgrade. just a thought
@FullThrottleRC
2 жыл бұрын
Oh no lol I'm not looking into anything like that right now. That's when you get into dumping money into something just for the hell of it and I'm not trying to do that. I know this combo is capable of 2.0s- sub 2s, I just have to get there.
@endosrc
2 жыл бұрын
@@FullThrottleRC yeah
@luiszapata7500
2 жыл бұрын
Awesome video! where you running the stock spur and what pinion? Thanks
@FullThrottleRC
2 жыл бұрын
Thanks! No I went with the spur and pinion from my old car when building this one. I ended up with a 84t spur and 20t pinion
@TheBlueberry606
2 жыл бұрын
Is the Turbo coming in causing the veer right?
@forrestcrabbe
Жыл бұрын
That dr10m is a better car than the losi 22s huh? I think I'm gonna pick up a drag car after the first of the year and am tryna get all the info I can on em 🤘y'all have a badass day🤘🍻🤘
@FullThrottleRC
Жыл бұрын
I haven't had any experience with the Losi so I can't really compare them. I will say I don't believe they are completely comparable cause the Losi is a ready to run car, sort of aimed at helping people get started in drag racing. While the DR10M is more like a racers kit. Think Traxxas Bandit vs Associated B6 kit. Two nice cars but aimed at different markets.
@forrestcrabbe
Жыл бұрын
@@FullThrottleRCyeah I don't much about rc, I only have an smt10 and a coupla scx24's, but I've taken an interest in no prep drag racing so I'm tryna learn. Thanks for yer help 🤘🍻🤘
@powermadracing5116
2 жыл бұрын
Great video.. awesome progress drop one tooth on the pinion that car will eat...
@FullThrottleRC
2 жыл бұрын
Thank you!!! I'll continue to play around with gearing as I go. I think you're right, I'm pretty close to the sweet spot!
@antonep4721
Жыл бұрын
Hey what happend with the tekin setup
@FullThrottleRC
Жыл бұрын
I had a lot of trouble with heat with it. In the southern heat of summer without a fan, the ESC got hot way too quickly.
@BERSERKERNA39
2 жыл бұрын
If you're spinnin' !! You ain't winnin' !! Great 🎥
@FullThrottleRC
2 жыл бұрын
Thank you!!!
@luiszapata7500
2 жыл бұрын
20 to 21, dont know how i missed that. thanks anyways
@ryangertridge
2 жыл бұрын
Good evening sir, I am getting into the rc drag no prep also, am looking for a motor/ecs combo where can tune and boost all that, looking to be really competitive if possible I have a dr10 building, any help would be greatly appreciated ✌️🇨🇦
@FullThrottleRC
2 жыл бұрын
I'm currently running the Maclan DRK and a Trinity Drag Master 3.5t motor. I know a lot of people are running the R1 stuff now as well. I can't really compare them since I've never tried the R1 stuff but I'm happy with the combo I have at the moment.
@rgishire
2 жыл бұрын
Whatbis the different between the drk 160 tsr esc. VS the drk160 drag race king esc One with out TSR it’s like 30 bucks cheaper so I was just wondering if you might know the difference between the two
@FullThrottleRC
2 жыл бұрын
I'm not really sure honestly. I did notice the newer tsr editions seem to have a different cap pack than the DRK that I have. Maybe that's where the extra cost comes in🤷🏻♂️
@TheBlueberry606
2 жыл бұрын
So my thing is, were the data coralates to the car vering right.
@FullThrottleRC
2 жыл бұрын
I honestly think the car is heading right just because of the inconsistencies in the road. It's not the perfect place to test but it's the easiest I can get. The rpms nor the gs are varying around that point. One day I'll find a nice flat spot to test on for real
@stevebelke9650
11 ай бұрын
Where do you get all your information for that died did you bite or did you get it online of what the data you got how do you get to is what I'm trying to say
@FullThrottleRC
11 ай бұрын
Are you talking about the run data that I'm looking at? All of that data is downloaded from the ESC after each pass. The other data I use is from the GNSS performance analyzer, I can get incremental times and speeds from the app.
@natyvia
Жыл бұрын
What motor you running with this esc
@FullThrottleRC
Жыл бұрын
Currently running the Trinity Drag Master 3.5t
@manuel39164
2 жыл бұрын
Asome its very good for me
@FullThrottleRC
2 жыл бұрын
Thank you!
@martinvaillancourt5850
2 жыл бұрын
.. what the wheels nuts .. not 17mm ?? I want to by the all tires and wheels , if you have..bot what the parts number thk you Bro 🤟🙏
@FullThrottleRC
2 жыл бұрын
I'm sorry I don't think I completely understand your question. The wheels are SSD Aluminum beadlocks though and use a 12mm hex
@meangreen8812
2 жыл бұрын
What size pinion and spur are you running?
@FullThrottleRC
2 жыл бұрын
20t pinion and switched to an 84t spur at the end of this video
@meangreen8812
2 жыл бұрын
@@FullThrottleRC Thanks
@ingadrian07
2 жыл бұрын
what tablet are you using
@FullThrottleRC
2 жыл бұрын
I use an Amazon fire tablet.
@yojiholmesproductions
2 жыл бұрын
What motor?
@FullThrottleRC
2 жыл бұрын
Trinity Drag Master 3.5t
@yojiholmesproductions
2 жыл бұрын
@@FullThrottleRC would you try a 3 or 2.5 or a 2.0 turn motor?
Пікірлер: 75