Nice work Ty! But the real question is... would we ever do a video colab?
@fatmanbud
6 жыл бұрын
For an old guy like me new to RC these tips are awesome. Thanks a ton.
@smanders-smanders
6 жыл бұрын
Awesome video Ty! It’s so good to see the Pros helping out amateurs...much appreciated! It would be great to see this same setup video for your eBuggy. I am never sure about how much brake to dial into the ESC vs Radio as well as drag brake. I know a lot comes down to personal preference but it would be very interesting to hear your logic behind your setup. Thanks Ty!
@tytessmann5842
6 жыл бұрын
Unfortunately this is something that is nearly impossible to show in a video it is something you have to find through trial and error on the track.
@robbieracer3294
6 жыл бұрын
love these long tutorials like this...nice
@1187steele
6 жыл бұрын
Thanks for letting me in on the pro tips !!
@ericgordon4746
6 жыл бұрын
You have a wealth of knowledge. Thank you for your input. Kuddos.
@leonjansevanrensburg8186
3 жыл бұрын
Your engines are awesome... U know a few people at the local track who run your motors... I'm all the way from south africa... Track name is Mandalay raceway
@dilloncaldwell7156
6 жыл бұрын
I'm definitely going to use flat head screws on my servos for now on. Thanks for the tip!
@terryallen3550
6 жыл бұрын
Sorry Ty and family, I commented without even saying hi to yous, Hi and thanks for the ripper races that caught me so many times on the edge of my seat.. That's racing ! Fastest refueling mum and coolest rc family I know of. :-)
@ztarchyld7646
6 жыл бұрын
Best driver ever go job and God bless you and your family
@MoneyMaker-wr6ml
4 жыл бұрын
first i just wana say the video was extreamly helpful
@tewatenebillemery5584
4 жыл бұрын
thanks for tips
@tjuan7
6 жыл бұрын
Great vid. I see you fish a lot also.
@marmilaguilar4626
6 жыл бұрын
Thanks for the video 👍🏻👍🏻
@rogerlid2118
6 жыл бұрын
Beautiful car, man
@charlesbonkley
4 жыл бұрын
Is all that chatter normal? Getting back into RC, and that was the first thing I noticed in the video. Back in the early 90's, all that glitchiness would have been troublesome, but maybe normal and just "noise" in today's modern electronics? EDIT: Upon further review, is that chatter caused by the MKS servos not being 100% compatible with the transmitter's protocol?
@thercscaler
6 жыл бұрын
Great video, show us the Trophy Truck in the back!
@sc10rs
6 жыл бұрын
Awesome vid!! Cheers!!!!
@nothingbasic
6 жыл бұрын
Can you do a tutorial on the way you set up your radio please I have the same and am clueless I'm sure many people would be interested too
@turbined
6 жыл бұрын
nothingbasic I agree. I think this is an area where a lot of us club racers should be a little bit better lol.
@muletowndumpsters
6 жыл бұрын
Good info
@Stinky_G04t
6 жыл бұрын
Hey tye can you do a video of the xt connecter is hooked into you battery I wanna do this to my box just not sure how you did it!
@briancarroll6245
6 жыл бұрын
Hi Ty do you use the air filter cover on the dusty tracks. Like the cover in the world's
@johnnyb1134
5 жыл бұрын
Dont forget to get everything strait everyone
@Cardiakk
6 жыл бұрын
What are those flathead screws on your servos and what's the cap screw that you're using on the servo horn?
@sandhiwijaya6479
5 жыл бұрын
Hai Mr. Ty How about tx sanwa???the response and range???
@ztarchyld7646
6 жыл бұрын
Good
@sandhiwijaya6479
5 жыл бұрын
What TX series did u used???
@R1Kyle
6 жыл бұрын
How strong of servo do you like for both your steering and your throttle / brake?
@tytessmann5842
6 жыл бұрын
I use the MKS 599 in both buggy and truggy for throttle, break and steering.
@ilikerealflight
6 жыл бұрын
any ideas on fixing breaks that will randomly decide not to work? Like on the bench they work fine, and for most the run they work fine. But every now and then they just won't grab for whatever reason. As you can expect, this has nearly (havn't raced yet) resulted in crashes. either into my brother or i, or into some object. a quick release and re grab usually sorts it out but sometimes I don't have time to worry about that.
@tytessmann5842
6 жыл бұрын
This is probably not so much of an issue with the brakes as it is an issue with the receiver and/or the radio. I would first try a different receiver and then try a different servo.
@ilikerealflight
6 жыл бұрын
Ty Tessmann ah ok, thx for the recommendation. I will definately give that a shot. It is an RTR so the receiver might be a little iffy. The servo is aftermarket and fairly new
@terryallen3550
6 жыл бұрын
If you cant afford it brother, try repositioning your horn then retrim that servo or reposition your lock collars if there's a bad spot on the servo you may be able to bypass that dead spot. Just an idea. Might be silly but I got excited about it lol. Best of luck racers :-) I'm gaining interest in this sport.
@ilikerealflight
6 жыл бұрын
I know this is a very late follow up, but figured i should anyways. So, a little while ago i was going through the buggy, cleaning it up and stuff. Then i got to the linkage and found that i was able to get the top brake arm to jam in a way that would stop the servo short of where it was set to go, without even applying the brakes. A little bit of linkage tuning later, and there is no more jamming. I have yet to have the brakes fail on me since (Fingers crossed)
@cameronmardis
6 жыл бұрын
How do you set your breaks on your 1/10? 🤔
@tytessmann5842
6 жыл бұрын
First check on the website of the brand of ESC you are using for setups and then adjust from there on the track.
Пікірлер: 44