For all those asking about the kit, I think the vid poster was just showing his new Predator generator (that now comes with an electric starter)
@jong1796
2 ай бұрын
Thank you very much for the video . Very helpful. I made similar one from scratch .
@mariopic
3 ай бұрын
how to u keep puller from moving and being fixed to body of car
@Brulserz
3 ай бұрын
How do u prevent it from sliding?
@tsayvladimir2013
4 ай бұрын
Genius!
@leozboon8228
5 ай бұрын
I build these same set up but the whole Machine lift up from the back And it moves forward, what am I missing
@timothykeith1367
3 ай бұрын
It needs a crossbar with pinch weld clamps to attach to the vehicle
@yasiralabboodi8463
7 ай бұрын
I have front bumper frame I need to pull. Would ur home made DYI frame puller work. I need 2 inch to be pulled.
@flightmedic7169
9 ай бұрын
Awesome man. It’s so nice to see people who think like I do haha😂. Great job on this might try it on my old engine hoist
@wtfskitzo7783
10 ай бұрын
what was your step process for removing the side hand down air bags? it’s deployed on the passenger side and i want to remove it but at worried at how long it will take and how hard taking off/putting things back on are (the headliner and handle bars etc)
@daniel10-livinghope58
10 ай бұрын
Hi thank you for the information, we’re you able to fit in all rivets including both sizes?
@trialnterror
Жыл бұрын
I thought of this same idea, plugged it into the Google and poof here’s your video
@8004239dad
Жыл бұрын
This some u cud sale fr alot people need cheap dent puller exspeshly for radiator upper tie bar I have brand new lift just needs a new jack cus it broke bwn sitting around and u just gave good ideal I was o ready thanking using make dent puller wasn't quite shore this help me out alot I get cars from auction this make pulling dents way easer
@evanoliver44
Жыл бұрын
The jack that I have it’s 3 ton is it enough to pull out?
@evanoliver44
Жыл бұрын
Thank u brother very smart way and idea I love it
@bryanm9019
Жыл бұрын
Pay everything with your credit card using Trade Assurance as Trade Assurance by itself is fictitious without maybe strict order/contract verbiage. Write buyer can unilateral cancel order/contract (Alibaba Termination 10.2)if things are not met that you expect and you get the refund you expect. I also only recommend communicating using Alibaba to make sure everything is documented. It seems like AMEX and Chase Visa are the best card for disputing charges with it comes to that. Make sure you specify everything as what they state and advertise will not be your machine unless it's listed including your money back for delays and such. Like inspection report failed or has issues then state what you expect to happen as they will do what they want and you are stuck. What hoses are you getting, specify the requirements, yeah, it's a lot of work but then you hopefully get what you want. You see a certain machine model with parts well if you don't specify the parts they will do whatever they want and won't tell if you ask after they have your money. Just watch out and know the risks. Here is a contract I've been working on to close seller loopholes: docs.google.com/document/d/1IdF1Nixa3TdF8aoiYVTsPuQidoKvzpe0jSSykt-uFu8/edit?usp=sharing Let me know what you think, please.
@gustavolandazuri4302
Жыл бұрын
Awsome
@Kamikaze3557
Жыл бұрын
I just ordered one from here in the US, out of Wisconsin, just $ 8,500 free shipping to north central Ark. not sure when it will be shipped, it’s basically the same 1 ton, no markings. Need to clean up a small pond bank. Next I’ll need a trailer. Hope I luck out and it runs and runs as I hope.
@nextlevel6664
Жыл бұрын
Nice thanks for you Great Idee
@todddenen
Жыл бұрын
Badass...
@willsco866
Жыл бұрын
Hi, what are the control patterns on these machines? Deere or CAT. Can they be switched?
@SuperTeddy222
Жыл бұрын
Is good?
@juangarcia-rv7cy
Жыл бұрын
Where you get the accessorie that goes on the pinch welds ?
@That.youtubechannel
Жыл бұрын
How did you get the back of the rivets from falling into the chasis?
@GLeszega
Жыл бұрын
I think a couple of them did but luckily they never made any noise when the car was back together.
@That.youtubechannel
Жыл бұрын
@@GLeszega ok going to be tackling this job today thanks for the awesome video!
@Speelfluit
Жыл бұрын
How do you prefent it from moving around?
@chrisminblkdiamond
Жыл бұрын
If you're an American you should be ashamed of yourself for supporting communists.
@darploin5071
Жыл бұрын
It's probably a predator 420 that's what the gas tank looks like and it'll come in two types either a non hemi or a hemi looking at it from the top I cannot tell which one you have
@kevinbailey7758
Жыл бұрын
Anyone got plans they could share , wanting to build one
@ivan2touchypoo
2 жыл бұрын
Do you have anymore for sale?
@chrisveniott8962
Жыл бұрын
what the machine do you want?
@marinvlashich8325
2 жыл бұрын
How you get parts for this excavator.
@thespraysociety3276
2 жыл бұрын
That's bad ass
@n54andmore56
2 жыл бұрын
How did you get all of the rivet removed without the back falling in the frame?
@GLeszega
Жыл бұрын
I think a few of them did fall back in but they never made any noise when it was back together
@n54andmore56
Жыл бұрын
@@GLeszega I just went with a resistor.
@rickschritt1616
2 жыл бұрын
Did he mention what the thing cost?
@joebarry1974
2 жыл бұрын
Price please
@hus3685
2 жыл бұрын
How much did it cost and did you sell for more than what you paid for,was it easy to re sell
@jmtplittleguy3042
2 жыл бұрын
Y did I buy this ?
@harryonfraggle
2 жыл бұрын
Do you get any leakage out of the rams?
@bootsinglefooters
2 жыл бұрын
How much did it cost with shipping.
@marcomunoz7567
2 жыл бұрын
Hola, desde Chile Santiago, saludos, podría mostrar como sujeta al vehículo la parte inferior, gracias
@nicholaswithrow5748
2 жыл бұрын
How hard was this machine to get into the country how hard was the paperwork
@michaelayeni177
2 жыл бұрын
No hard if you have a broker
@wlhequipment1730
2 жыл бұрын
What did you end up selling it for?
@michelcarter3234
2 жыл бұрын
what type of hydraulic fluid to you used on it ?
@michaelayeni177
2 жыл бұрын
I just got mine for $3900 but there will be more fees. Is the Briggs and Stratton engine okay?
@jsc3792
2 жыл бұрын
Not okey, will overheated in short time when doing heavy work. It at least should be a diesiel engine, a little expensive maybe, And if you have reach me, i can offer you a one ton model with this engine only for 3400$, actually better quality
@jsc3792
2 жыл бұрын
Choose kubota, adding extra, take my advise, Mr
@dyorlendeluna8538
2 жыл бұрын
@@jsc3792 I’m interested do you have a link?
@julianabucio3680
2 жыл бұрын
How dificult was the curtain aibag replacement ? and where did you get it from ? I have a 2007 I purchased for my son at the auction and the driver side curtain airbag is deployed trying to see if I could replace it my self or find a ship to do it. Thanks
@GLeszega
2 жыл бұрын
Extremely easy, there is nothing challenging about it. I got the replacement airbag at a junkyard. I use car-part.com to find the nearest junkyard with the parts I need. If you have any questions feel free to reach out. Good luck on the build!! 🙌🏼
@gregkoprivnak2003
2 жыл бұрын
I have a one to Gehl, that would not even compare to mine
@eastatlantalandscapellc6053
2 жыл бұрын
So its been 10months… whats the update on it? How has it held up and what kind of work have you done with it.. line of work
@hitmenext1182
2 жыл бұрын
how much?
@hanssenjones
2 жыл бұрын
@GLeszega hey im looking to buy a remote control lawn mower that is the same brand as this excavator. I was wondering if you had any issues getting this to the us, and was there any unexpected costs involved? Im just leery about spending this much $ on a machine overseas. ive seen some horror story videos and i just want to make sure im not making a bad decision.
@jrv858
2 жыл бұрын
This is great im trying to build something like this for glue pulling and body work ..... thanks
Пікірлер