Greetings from the UK 🇬🇧! Having just started Airsoft (at 61), this is just what I'm after. I can't find any books about Airsoft 'Teching' or courses, therefore this Series is going to be invaluable. So, that's a 'Sub' from me for a great start to a Series. Thanks...
@mordrunkenblade
3 жыл бұрын
I too have found it difficult to find any good sources and/or guides… so I watch a lot KZitem!!! I am very mechanically inclined and have more tools than I know what to do with, so I want to do upgrades Myself. @TheAirsoftTech is a channel I have gone back to many times… good stuff!!! PS: I’m well into My 50’s and haven’t been playing for a year yet.
@eduardochinchilla2198
4 жыл бұрын
Keep putting out this kind of quality content. I have gained so much knowledge from your videos. I do have a small suggestion. Because your tone of voice is deep and paired with the fact that sometimes you say some words really fast there's several times that I don't understand certain words you were trying to say and lost the meaning of the instruction. maybe say the words a little clearer. Anyway that's it. No criticism just an observation. Again thank you.
@TheAirsoftTech
4 жыл бұрын
I’ve been playing with the idea of getting a mic to help out with the volume part... now the speed at which I speak is something I’ve been working on ever since high school. Lol
@50yearoldlerookie84
2 жыл бұрын
You just keep doing what you're doing little brother. You produce awesome videos with great content. You are really helping a lot of us who like to work on our airsoft guns without having to send them off and wait to get them back. Thanks for all you do and like I said, just keep doing it.
@wiskeywiskey0365
2 жыл бұрын
I definitely appreciate this series
@rm70x7
3 жыл бұрын
A couple things I might mention that have helped me. I am new to Airsoft Tech, but I have done a lot of mechanics on vehicles and heavy equipment. The trays are very handy for shop work, but sometimes we find ourselves repairing things in the field. Having a small flat magnet to place screws, bolts, or springs, can save your backside. Along those same lines, not a lot of people know that you can magnetize your tools by resting them on a magnet for a short period of time. The neodymium magnets inside of the quality motors are perfect for this. Magnetized tools are more expensive and not necessary. $0.02
@bangerairsoft4086
4 жыл бұрын
Only thing I tend to buy cheap is allen keys. The logic is that I'd rather have the allen key strip than the bolt in the gun and a whole set is less than $5.
@billsewell766
3 жыл бұрын
A trick you mite like is to cut a flat blade screw driver slot in. The pin of the anti reverse latch for releasing piston or to hold it back when assembling the gearbox love you show just got that idea of a new gel blaster that has been released in Australia you probably already know about it just letting you know because it’s the first I have seen so far
@kapowiekapowie865
4 жыл бұрын
THANK YOU. watching this right now. Can we maybe get some links to the items?
@retrofitt9904
4 жыл бұрын
Just go to lowes
@JoseGomez-ro3um
4 жыл бұрын
Great video. It will help many new techs get started. I wish I had this guide to fall back on when I started. Also I totally agree with the vice. That tool has saved me more than once. I do have a recommendation for additional tools to purchase. I’d also say to get a set of vice grip pliers and a set of needle nose pliers.
@hakont.4960
4 жыл бұрын
Add lockable pliers to your list, the type that surgeons typically use. I find they're very useful for keeping wires out of the way and they're also long and thin so they're good for getting into small spaces.
@slothgregory
4 жыл бұрын
I've had a g&g GC12 SPR for years and just recently wanted to start teching it your videos are super helpful. Can't wait for the rest of this series!
@thealliedspy4170
4 жыл бұрын
Best airsoft tech tool video I've seen yet, keep it up!
@72ultraairsoft36
4 жыл бұрын
Thanks for the video! It's common sense stuff here but its always nice to hear it from someone doing it ya know. Looking forward to next one, been taking notes from the tech tip videos and such as well. I'm looking at picking up a gate titan this week and setting it up in my Krytac PDW mk2. Picking up a Dremel and parts containers like yours in the morning. These videos are really helpful, I'm wanting to learn to be a tech because if I do the work then I know I can make sure its done well and i'm around more than the tech that is in once a week for a few hours.
@filipkunka4729
4 жыл бұрын
Great vid man!!! Looking forward for my first gun teardown
@_ty_5739
4 жыл бұрын
Please do another of these please
@inspirePC
4 жыл бұрын
Great video got everything exept matt but will get one soon. Tnx
@laykaholder8161
4 жыл бұрын
Great video I need help getting into teching please keep bring out more of these videos
@SolidSnake334-47
3 жыл бұрын
I think G@G uses JIS Japanese spec. not phillips . I would recommend the VESSEL MEGADORA IMPACTA, amazon has them for around 39 dollars.
@i-_-am-_-g1467
4 жыл бұрын
I literally have a small bucket full of different size allen keys mixed like that, so don't worry x)
@actuary530
4 жыл бұрын
8:07 is awesome!
@maddoxprimeaux3565
2 жыл бұрын
I really need this advice because I have gotten guns upgraded from places with a “reward winning tech” and when the gun comes back it doesn’t shoot or parts are missing on the gun *cough* *cough* evike tech
@robertkennion9020
3 жыл бұрын
Dont bother with allen keys, use allen head drivers....they are miles better.
@ZeonsZone
2 жыл бұрын
Great video tutorials! Going to be helpful trying to get my lancer tactical enforcer black bird upgraded. Was a little bummed to find it had a hard time reaching 90ft without drooping and a drifting a bit. Trying to get up to 150ft and accurate for a good training and outdoor game rifle. Any thoughts on what you would put in it to reach out further and more accurate on that build?
@dirtfishingillinois7997
4 жыл бұрын
I got lucky. I have all of these items but the mat.
@jorgecustodio3034
3 жыл бұрын
Hi are you doing GBB Tech ? I'am having issues with my recently installed z parts 3 round burst for my M4, or if you can reccommend chanel working on this kind of problem
@iloveathos
4 жыл бұрын
Where is part 2?
@TheCliqueGaming
4 жыл бұрын
Thanks for the video/info! Want to get into teching! Would you recommend starting on a cheap gun like cyma or would your recommend a platform like m4s?
@datutturugang666
3 жыл бұрын
i work as a car mechanic. can i use the same tools i use for cars, for guns too? i have quite small tools too, nowadays cars have weirder screws day after day
@trumainegordon5095
3 жыл бұрын
Hey i don’t have any idea where to go for a tech guy, do you do builds for customers?
@Greatjourney757
3 жыл бұрын
Huh Ive got everything you suggested before even watching this video :D
@blakehoffman6233
4 жыл бұрын
Why does every shot of mine fade off to the right?
@DatBoiUKno
4 жыл бұрын
Get some Amazon affiliate links. Also where's part 2?
@Alex_seaceeper
4 жыл бұрын
Nice video. Interesting)) Like))
@troyw5832
4 жыл бұрын
☺😊😀😁😂5 Smile's Nice nice unfortunately after Fall Out "i like the matt" i enquired on one from hear and was told it would not be sent and found its not allowed by law hear north Korea is the other 😮the only other????WTF😨😵😭i can't believe it hell you could have a range at the park to regulate😕 but we do get a gel blaster the range well i don't think you will get the possible BB but on general upgrade 40m is a good one and you can get parts but you are not allowed to get BB or a lot off the parts but we get a lot of post off airsoft motors and really you could anyways and a lot is nylon at best but there is a few with metal on the G9 set on!
@John--cu2yu
3 жыл бұрын
English and metric? Pmsl English is metric, you mean metric and imperial
@KnightOfGaea
3 жыл бұрын
I thought he meant Imperial when he said English, lol.
Пікірлер: 40