Great Video Adam! Wished you had the before and after (or while you did it) video. The way you explain it - as I have the "before" - I can figure it out. Thank you for your contributions!
@adamsgunroom9331
2 жыл бұрын
Sorry me too doing the video was an afterthought. People were asking many questions on a Facebook group and just decided to help
@John2413h
2 жыл бұрын
this is incredible. had mine done in 20 minutes after watching your tutorial, thanks a ton. all the ones I saw were for a different style, where did you find the steel rail on the top. everywhere I look all picatinny rails are aluminum
@adamsgunroom9331
2 жыл бұрын
Hkparts.net thank you happy I was able to help
@John-ph3wd
2 жыл бұрын
Great video thanks for saving me money and here's some different things I did to make it easier on myself in case anyone has trouble. At 19:30 I could not make that disconnecter fit without getting in the way of the safety selecter so I cut the top tab on the right off entirely and and trimmed down the left side that turns 90° about half way it made everything fit a lot easier.I used a screw at the top of the he trigger housing to hold the hammer spring completely out of the way after hammer installation. Worked perfectly after assembly hopefully what I did will be able to help someone having trouble. Thanks again for the video it saved me a bunch of money.
@adamsgunroom9331
2 жыл бұрын
I’m happy it worked for you great advice on the safety selector!
@thesurplusfirearm2374
2 жыл бұрын
Thanks for the helpful video
@adamsgunroom9331
Жыл бұрын
Your welcome
@paullarocque2158
8 ай бұрын
I cut down a 3/16 drill bit to keep the trigger parts aligned, works great.
@adamsgunroom9331
8 ай бұрын
Good idea
@jacobcox6144
Жыл бұрын
On the standard grip frame wings, there are bushings that can replace the auto sear he demiled as a trigger spacer incase you want to be extra careful of nfa laws Edit also shove a screwdriver through the selector lever hole to retain the hammer spring legs
@adamsgunroom9331
Жыл бұрын
Thanks for the add
@isaacspoon
2 жыл бұрын
anychance you can also upload this onto webpages like full30 too? im sure youtube might take it down sooner rather tahn later. im about to be needing this and would love tpp watch your build
@adamsgunroom9331
2 жыл бұрын
I will look into a more friendly place to upload the tutorials. Thanks for the sub
@Coopdeville06
Жыл бұрын
I wonder if a ar15 drop in trigger could be customized and fit into a cetme lower. I don't think it would be too difficult to achieve.
@adamsgunroom9331
Жыл бұрын
Check out hk parts.net it had something like that a while back
@ericlarson6470
Жыл бұрын
I cut the houseing now when I put it in the gun the front of the grip assembly is loose. What am I doing wrong?
@adamsgunroom9331
Жыл бұрын
You need to weld in a shelf that inter faces with the front of the receiver. Then you weld in a flat piece of metal in your grip housing that sits on the shelf. Check out my total build video. I get a better shot of that part. Message me with further questions
@markneumann1413
Жыл бұрын
Adam what is the spring in the large hole called ?? I need to replace mine as mine it is extended and does not look like yours
@adamsgunroom9331
Жыл бұрын
Are you doing an hk91/g3 kit?
@adamsgunroom9331
Жыл бұрын
Yours might use an hk style ejector spring it’s a cylinder type spring you can get them at hk parts.net
@mr.he-rock-ohh2355
Жыл бұрын
does anyone have issues with their safety? I currently can fire semi-auto in all three positions.
@adamsgunroom9331
Жыл бұрын
I’m not sure on that one try a different safety maybe it’s worn.
@mr.he-rock-ohh2355
Жыл бұрын
@@adamsgunroom9331 Yea im using a magpul ambi one now and it does the same thing.
@epicgangnamstyle8783
Жыл бұрын
Why did they put the full auto mode on the bottom when they knew the selector was a pain in the ass to move
@adamsgunroom9331
Жыл бұрын
Most of the time the military doesn’t want you to start in full auto unless your an ak lol. Even an m16 is a bit annoying as you have to rotate the safety 180 degrees.
@magua1368
Жыл бұрын
BTW: liked, and subscribed
@DaddyStarbuck
2 жыл бұрын
Vid is palpable at 1.25x speed.
@adamsgunroom9331
2 жыл бұрын
Good suggestion it’s a bit boring from an entertainment standpoint
@xarllarps1998
Ай бұрын
God this hurt to watch lol
@adamsgunroom9331
Ай бұрын
Make a better one and post it. Lol
@magua1368
Жыл бұрын
Please explain to us {early on in the video} WHAT direction you are applying pressure and WHAT actions you are using to remove/install parts. On re-assembly of the FCG, would it make sense to put the trigger components in FIRST and put in/pin the hammer/spring last? Your videos are good; with more info on precise actions to get to your end result, they will be GREAT! Cheers from Southwest Indiana
@adamsgunroom9331
Жыл бұрын
Hi I would remake the video but unfortunately I don’t own my cetme anymore to do a different video
@magua1368
Жыл бұрын
@@adamsgunroom9331 I wasn't criticizing in a bad way. I think it was a great video. I'm getting ready to build my first if 2 cetme C kits. If I may ask, why don't you have yours anymore?
Пікірлер: 38